-
Ubiquiti airFiber X 5 GHz 30 dBi Slant 45 Dish Antenna
- 30 dBi high-gain dish optimized for long-range PtP backhaul
- Precise 5.8° beamwidth minimizes interference and improves link quality
- Rugged outdoor design: 200 km/h wind rating, corrosion protection, cable shroud
- Dual-linear 45° polarization for MIMO performance
- Easy, snap-in mounting system with alignment aids
- Built for airFiber X radios, enabling gigabit-plus throughput
-
Ubiquiti airFiber 5XHD (AF‑5XHD)
- High-gain airFiber bridge with 27 dBi directional antenna
- Up to 1.5 Gbps FDD throughput, low‑latency performance
- Built‑in GPS sync and alignment tone support
- Rugged outdoor housing with IP-class durability
- Dual-power Ethernet (data + management) and passive PoE
- airOS tools for spectrum, alignment, and channel optimization
-
Ubiquiti airFiber 24HD (AF‑24HD)
- Carrier-grade 24 GHz PtP bridge with dual high-gain TX/RX antennas
- 2 Gbps full-duplex throughput, ultra-low (<200 µs) latency
- 20+ km link performance with GPS-synchronized precision
- Rugged IP67 metal housing, military-grade and harsh-weather certified
- Full airOS diagnostics with LED dBm display and alignment tone
-
Ubiquiti airFiber 24 (AF-24)
- Rugged carrier-grade 24 GHz bridge with precise dish and tech-grade mount
- Dual Ethernet config/data ports plus alignment tone interface
- Delivers 1.5‑1.6 Gbps aggregate throughput, with ultra-low (< 1 ms) latency
- Integrated GPS synchronization, full-duplex FDD support
- High-gain antennas (33/38 dBi), <3.5° beamwidth for excellent long-range links
- Encrypted with 128-bit AES, >1 Mpps forwarding capacity
-
Ubiquiti airMAX Rocket Prism 5AC Gen 2
- Rugged die-cast outdoor AP with IP67 protection
- 500+ Mbps real throughput using airMAX ac and airPrism filtering
- Dual RP-SMA external antennas + GPS sync support
- Full wireless analytics and management via airOS 8
- Ideal for dense deployments and scalable PtMP networks
-
Ubiquiti airMAX PowerBeam 5AC
- High-gain 25 dBi directional antenna with integrated radio feed
- 450+ Mbps real throughput using airMAX ac technology
- Passive PoE powered via included 24 V injector
- Rugged, weather-resistant enclosure with high wind and environmental ratings
- Advanced RF diagnostics including airView and real-time spectrum tools
- Easy install and alignment with dedicated Wi-Fi setup and ±20° tilt
-
Ubiquiti airMAX NanoStation NS 5AC
- Integrated 16 dBi directional antenna in weather-resistant housing
- Dual Ethernet ports with PoE-in and passthrough
- 450+ Mbps real-world throughput on airMAX ac protocol
- Wide channel support (10–80 MHz) and dual linear polarization
- Rugged design (–40 °C to +70 °C), ±24 kV ESD protection
- Convenient airOS 8 management with Wi-Fi tools and indicators
-
Ubiquiti airMAX NanoBeam 5AC Gen2
- Compact 19 dBi directional CPE with integrated radio
- Two Gigabit ports: PoE-in and passthrough
- 450+ Mbps real throughput with airMAX ac TDMA
- Support for 80 MHz channels and WPA2-AES security
- Built-in airView diagnostic tools and easy PoE setup
- Rugged outdoor design: –40 to 80 °C, rated for 200 km/h wind
-
Ubiquiti LiteBeam 5AC Gen2 5GHz CPE
- High-gain 23 dBi directional antenna with a lightweight, reflector dish design
- airMAX ac protocol with 80 MHz channels for superior throughput
- Integrated 2.4 GHz management Wi-Fi radio for easy configuration via smartphone
- Delivers up to 450+ Mbps real TCP/IP throughput
- Durable for outdoor deployments, including high wind areas (200 km/h rated)
- Tool-free quick mounting system with pole mount hardware
- Runs on airOS 8, providing advanced RF analytics and setup tools
-
Ubiquiti airMAX Lite AP GPS (LAP‑GPS)
- GPS‑synced 5 GHz sector access point with integrated 17 dBi antenna
- Delivers 450+ Mbps real-world throughput with >50 simultaneous clients
- Outdoor-rated for harsh environments (–40 °C to +70 °C; 200 km/h wind)
- Passive PoE power solution; low 7 W consumption
- Built-in 2.4 GHz management Wi‑Fi and spectral analysis radio
- Ideal for scalable WISP deployments with TDMA synchronization
-
Ubiquiti LTU Rocket 5 GHz PtMP BaseStation
- 5 GHz PtMP BaseStation with dual RP-SMA ports and GPS sync
- IP67-rated weatherproof die-cast enclosure
- 600 Mbps real throughput (>900 Mbps with FW update)
- 2+ Mpps packet handling; supports up to 255 clients
- Flexible channel widths (10–100 MHz) and 29 dBm TX power
- Rich toolset: airView, alignment, diagnostics, auto TX and distance tuning
- Managed via Web UI, Bluetooth UISP app, SNMP, SSH
-
Ubiquiti LTU Pro 24 dBi 5 GHz CPE
- Integrated 24 dBi 5 GHz antenna; outdoor pole-mount design
- Gigabit RJ45 with passive 24 V PoE power
- 600+ Mbps real TCP/IP throughput (900+ Mbps with updated firmware)
- Supports 10–100 MHz channels, 1024‑QAM (upgradable to 4096‑QAM)
- Rugged –40 °C to +60 °C operation; ±24 kV ESD protection
- Managed via Bluetooth UISP App, Web UI, SNMP, SSH
- Heightened RF control: auto power/distance, airView spectrum analysis
-
Ubiquiti LTU‑LR Long-Range 5 GHz CPE
- High-gain 26 dBi integrated antenna ideal for long-range PtMP links
- Gigabit Ethernet with 24 V passive PoE-in and adapter included
- 600+ Mbps real throughput, upgradable to 900+ Mbps via firmware
- 1024-QAM modulation, future 4096-QAM support
- Channel width flexibility: 10–50 MHz (future 100 MHz)
- Rugged IPX6 enclosure, -40 °C to +60 °C operating range
- Pole-mount kit, Bluetooth/UISP app for easy setup
- Comprehensive diagnostics: airView, alignment, SNMP, SSH
-
Ubiquiti LTU Lite 5 GHz Client Radio
- Integrated 13 dBi directional antenna, outdoor-rated enclosure
- Single Gigabit RJ45 port with passive 24 V PoE‑in
- 5 GHz LTU technology supporting 1024‑QAM (upgradable to 4096‑QAM)
- Flexible channel widths (10–50 MHz; future 100 MHz)
- Delivers 600 Mbps+ real throughput, up to 900 Mbps+ with updated firmware
- Rugged performance: –40 °C to 60 °C, survival to 200 km/h winds
- Managed via Bluetooth, web UI, SNMP/SSH; CPE or router bridging modes
-
MikroTik CRS310‑8G+2S +IN 2.5GbE 10GbE Switch
- 8 × 2.5 GbE ports + 2 × 10 Gb SFP+ uplinks
- Dual-core ARM CPU (800 MHz), 256 MB RAM, 32 MB flash
- 80 Gbps non-blocking throughput, ~34 W max power
- USB-A port, single user-replaceable fan
- Dual-boot RouterOS v7 (L5) & SwOS
- Rackmount kit, –40 °C to +60 °C, rugged compact build
-
MikroTik CRS310‑1G‑5S‑4S +IN 10G SFP+ Switch
- Ports: 1× 1 GbE PoE‑IN + 5× 1 Gb SFP + 4× 10 Gb SFP+
- CPU & Memory: 800 MHz ARM v7, 256 MB DDR3, 16 MB flash
- Switch Performance: 162 Gbps switching, 81 Gbps forwarding, ~68 Mpps
- Power: Dual inputs (DC + PoE), 8–20 W consumption, single internal fan
- Dual OS: SwOS or RouterOS Level 5 with hardware VLAN/L3 offloading
- Build: Compact 1U indoor rackmount, –40 °C to +70 °C range
-
MikroTik CRS309‑1G‑8S +IN 8-port 10G SFP+ Switch
- 1 × Gigabit RJ45 (PoE-in) + 8 × 10G SFP+ ports
- Dual-core 800 MHz CPU, 512 MB RAM, 16 MB flash
- Fanless, metal heatsink case with rackmount kit
- Dual-boot SwOS or RouterOS (L5); 162 Gbps switching capacity
- Passive cooling, low 17–23 W power draw
- Wide operation range: –40 °C to +70 °C
-
MikroTik CRS326‑24G ‑2S+RM 10G Rackmount Switch
- 24× Gigabit RJ45 + 2× 10G-capable SFP+ in 1U rackmount
- Dual-boot OS: SwOS or RouterOS (Level 5)
- Silent, fanless design with passive cooling
- Dual power input: DC jack + Passive PoE-in (10–30 V)
- Non-blocking 44 Gbps throughput, 16K MAC, VLAN/ACL support
- Low power (~24 W max), wide temperature range (–40 °C to +60 °C)
-
MikroTik CRS326‑24G‑ 2S+IN dual‑boot 10G Switch
- 24 × Gigabit RJ45 + 2 × 10G-capable SFP+ uplinks
- Dual-boot OS: SwOS or RouterOS L5
- Passive, fanless desktop design (21 W max)
- Dual power: DC jack + passive PoE-in (10–30 V)
- ~44 Gbps non-blocking switching, 16K MAC table, VLANs, ACLs, mirroring, STP
- 512 MB RAM, 16 MB flash, and ~200K hr MTBF
-
MikroTik CSS610‑8P‑2S +IN PoE Smart Switch
- 8× Gigabit PoE‑out ports (802.3af/at + passive)
- 2× 10G SFP+ uplink ports
- Powerful 140 W PoE budget with single PSU
- Fully passive cooling, rugged compact design
- SwOS Lite with VLANs, QoS, mirroring, MAC/IP editing
- 48–57 V DC + 100–240 V AC input, low 12 W idle draw
- High switching throughput (~55 Gbps)
-
MikroTik CRS112-8P-4S-IN PoE Gigabit Switch
- 8× Gigabit PoE‑out ports (auto-sensing 802.3af/at + Passive)
- 4× 1 G SFP uplink ports
- Auto voltage sensing: 18–28 V or 48–57 V DC input
- RouterOS L5 with full L2/L3 & PoE management
- Non-blocking 12 Gbps throughput, 24 Gbps switching capacity
- Fanless ceramic desktop/rack 1U form factor
- Low idle consumption (~10 W), max PoE capacity
- Comprehensive L2 features including VLANs, STP, IGMP, ACLs
-
MikroTik CRS318‑1Fi‑ 15Fr‑ 2S‑OUT (netPower 15FR)
- 16 × 10/100 Mbps Ethernet (15 reverse PoE-in, 1 PoE-out)
- 2 × SFP fiber uplinks
- Passive, fanless, IP54 outdoor enclosure (–40 °C to +70 °C)
- ARM CPU (800 MHz), 256 MB RAM, 16 MB flash
- Dual power: reverse PoE-in + DC jack
- Non-blocking 3.6 Gbps throughput; 7.2 Gbps switching
- Quiet, passive cooling
- Dual-boot SwOS/RouterOS (Level 5)
-
MikroTik CRS305‑1G‑ 4S+OUT (FiberBox Plus)
- 1× Gigabit RJ45 + 4× SFP+ (10G-capable) ports
- Dual-core 800 MHz CPU, 256 MB RAM
- IP66-rated, outdoor-grade metal enclosure
- Quad power options: PoE-in, DC jack, 2-pin terminal
- Passive cooling, low ~17 W max power use
- SwOS/RouterOS dual boot with Level 5 license
- 41 Gbps non-blocking throughput, 82 Gbps switching
- Rugged build for –40 °C to +70 °C environments
-
MikroTik CRS305-1G-4S+IN Switch
- 1× Gigabit Ethernet port (also supports PoE-in, 802.3af/at or passive)
- 4× 10G SFP+ cages (supports 1.25G/10G modules)
- Dual DC jacks (12–57 V) for power redundancy
- ARM CPU + 512 MB RAM + 16 MB flash
- Dual-boot OS: RouterOS or SwOS (License level 5)
- Fanless metal enclosure, compact desktop design
- Performance: ~41 Gbps non-blocking throughput, 82 Gbps switching capacity, ~61 Mpps forwarding
- Power draw: ~10 W idle, ~18 W under full load
- Operating range: –40 °C to +70 °C, MTBF ~200,000 h
-
MikroTik CSS326‑24G‑2S+RM Cloud Smart Switch
- 24× Gigabit RJ45 + 2× 10G-capable SFP+ uplinks
- Passive, fanless design with low 19 W power draw
- SwOS management: VLANs, ACLs, mirroring, bandwidth control
- 1U rackmount: 443×144×44 mm, –40–70 °C operational range
- Dual power: DC jack + passive PoE-in (10–30 V)
- 16k MAC table, ~44 Gbps non-blocking throughput
-
MikroTik CRS310‑1G‑5S‑ 4S+OUT (netFiber 9) Switch
- 1× Gigabit Ethernet (PoE‑IN) + 5× 1 G SFP + 4× 10 G SFP+
- ARM v7 CPU, 256 MB RAM, 16 MB flash
- RouterOS L5 with hardware VLAN and light L3 offload
- Passive cooling, fanless with heatsink
- Dual power via DC or PoE-in; max ~20 W consumption
- Weatherproof IP54-rated outdoor enclosure, rugged mounting kit
- 28 Gbps non-blocking, 56 Gbps switching capacity
-
MikroTik netPower Lite 7R (CSS610‑1Gi‑7R‑2S+OUT) Switch
- 8 × Gigabit Ethernet (7× reverse PoE‑in, 1× PoE‑out)
- 2 × 10G SFP+ fiber uplinks
- 28 Gbps non-blocking throughput, 56 Gbps switching capacity
- Rugged IP54 enclosure, –40 °C to +70 °C
- Flexible powering: reverse-PoE, DC jack, 2-pin terminal
- Passive cooling, low idle (~7 W) power draw
- SwitchOS Lite with VLAN, QoS, mirroring
-
MikroTik CSS610-8G-2S+IN Cloud Router Switch
- 8× Gigabit Ethernet ports
- 2× 10G SFP+ cages for high-speed uplinks
- Fanless, silent desktop design with included rackmount ears
- SwOS: lightweight web-managed OS
- Power input via DC jack or Passive PoE (12–57V)
- Low power consumption: ~5W idle, ~11W max
- Advanced L2 features: VLANs, traffic shaping, MAC filtering
- Compact 1U form factor
-
MikroTik CRS106‑1C‑5S Cloud Router SFP Switch
- 5× 1G SFP ports for fiber connectivity
- 1× Combo port (RJ45/SFP auto-switching)
- Layer 2 non-blocking switching (~6 Gbps total throughput)
- Runs RouterOS with Level 5 license
- Passive PoE or DC jack input (11–30V)
- Compact fanless desktop design
- Console port (RJ45) for management access
- Low power consumption (max 11 W)
-
MikroTik CSS106-1G-4P-1S (RB260GSP) Smart PoE Switch
- 5× Gigabit Ethernet ports (4 with Passive PoE out)
- 1× SFP cage for fiber uplink
- Passive PoE-out: up to 1A per port, 2A total
- Power input: 11–30V via DC jack or PoE-in
- SwOS web-managed smart switch OS
- Switch chip: Atheros QCA8337 with non-blocking Layer 2 performance
- Fanless plastic desktop design
- Low power consumption (~5W idle, ~53W max with PoE load)
-
MikroTik RB260GS Smart Switch (CSS106-5G-1S)
- Ports: 5 × Gigabit Ethernet + 1 × SFP cage (1G)
- Switch Chip: Atheros QCA8337
- Operating System: SwOS – simple web-based management
- Power: 11–30 V DC input (jack or passive PoE), 12V PSU included
- Case: Compact plastic desktop enclosure
- Cooling: Passive (fanless)
- Features: VLANs, port isolation, mirroring, bandwidth control, jumbo frames
- Power Consumption: Max 6 W
- Ideal For: SOHO, home labs, or small edge-switch deployments
-
MikroTik CCR2216-1G-12XS-2XQ Cloud Core Router
- CPU: 16-core 2 GHz Amazon Annapurna Labs AL73400
- RAM: 16 GB DDR4
- Ports:2 × 100G QSFP28, 12 × 25G SFP28 (backward compatible), 1 × 1G RJ45 (management)
- Switch Chip: Marvell Prestera Aldrin2 with Layer 3 hardware offloading
- Storage: 128 MB NAND + 2 × M.2 SATA slots
- Power: Dual hot-swap redundant PSUs
- Cooling: 4 smart fans
- RouterOS: v7 with Level 6 license
- Form Factor: 1U rackmount
- Performance: Up to 720+ Gbps switching capacity, IPsec acceleration
-
MikroTik CCR2116-12G-4S+ Cloud Core Router
- CPU: 16-core 2 GHz Amazon Annapurna Labs AL73400 (ARM 64-bit)
- RAM: 16 GB DDR4
- Ports: 4 × 10G SFP+, 12 × 1G Ethernet via switch chip, 1 × 1G Ethernet direct to CPU (management)
- Storage: 128 MB NAND + M.2 PCIe slot for SSD
- Switch Chip: Marvell 98DX3255
- RouterOS: Level 6 license, pre-installed (v7)
- Power: Dual internal redundant PSUs
- Form Factor: 1U rackmount
- Cooling: 4 active fans
- Performance: ~39 Gbps throughput, IPsec hardware acceleration
-
Ubiquiti UniFi Gateway Pro (UXG‑Pro)
- Dual WAN: 1× 1GbE RJ45 + 1× 10GbE SFP+ (load balancing & failover)
- Dual LAN: 1× 1GbE RJ45 + 1× 10GbE SFP+
- Advanced Security: IDS/IPS (~3.5 Gbps), DPI, L7 firewall, VPN (IPsec, OpenVPN, WireGuard)
- Performance: Quad-core ARM Cortex-A57 CPU, 2GB DDR4 RAM
- Management: UniFi Network app, 1.3″ status touchscreen
- Power Redundancy: Built-in PSU + UniFi SmartPower RPS support
- Form Factor: 1U rack-mountable
- NDAA-compliant: Approved for government use
-
Ubiquiti UniFi Gateway Max (UXG‑Max)
- Compact 2.5 GbE security gateway with quad-core CPU and 2 GB RAM
- 5 total 2.5 GbE ports: 1 WAN + 4 LAN (one remappable as secondary WAN)
- Advanced firewall, Layer 7 DPI, content filtering, and QoS
- Supports IDS/IPS (2.3 Gbps throughput) with UniFi CyberSecure
- Built-in cloud-enabled VPN (Teleport, WireGuard, OpenVPN, IPsec)
- Managed via UniFi Network Controller (Cloud Key, UDM, or self-hosted)
- USB-C power input (5 V/3 A), compact and fanless design
- NDAA compliant, durable, and ideal for high-performance home or business networks
-
Ubiquiti UniFi CloudKey+ (UCK-G2-SSD)
- Compact UniFi OS controller with integrated 1 TB SSD
- Octa-core Cortex-A53 processor and 3 GB RAM for smooth multitasking
- 32 GB eMMC flash for system storage
- Supports all UniFi apps: Network, Protect, Access, Talk, and Connect
- Powers via PoE (802.3af) or USB-C Quick Charge 2.0/3.0
- Manages up to 24 HD, 14 2K, or 8 4K UniFi cameras
- Features a 1.42″ OLED display for system monitoring
- Sleek anodized aluminum chassis, fanless and silent
- NDAA-compliant and ideal for small-to-mid scale UniFi deployments
-
Ubiquiti UniFi CloudKey+ (UCK-G2-PLUS)
- Compact cloud-managed UniFi OS controller
- Octa-core Arm processor with 3 GB RAM
- 32 GB eMMC storage + 1 TB 2.5″ HDD (upgradeable to 5 TB)
- Supports UniFi Network, Protect, Access, Talk, and Connect apps
- Manages up to 20 G3 or 10 G4 UniFi cameras in Protect
- 1× Gigabit Ethernet port with PoE-in (802.3af) support
- 2× USB-C ports for alternative Quick Charge 2.0/3.0 power input
- 1.42″ OLED screen for status monitoring
- Rugged aluminum chassis, fanless and silent
- Compatible with UniFi Controller v7+ and NDAA compliant
-
Ubiquiti UniFi CloudKey Enterprise (CK-Enterprise)
- 1U rackmount controller with industrial-grade steel/aluminum chassis
- Intel Xeon-SP 16-core CPU with 32 GB DDR4 ECC RAM
- 256 GB onboard SSD storage (M.2 SATA)
- Dual power supplies – hot-swappable 550 W AC/DC for full redundancy
- 1× 1 GbE RJ45 port + 1× 10 GbE SFP+ uplink + Bluetooth + console port
- 1.3″ touchscreen for quick diagnostics and system status
- Manages 1,000+ UniFi devices and 10,000+ clients
- Compatible with UniFi OS apps: Network, Identity Enterprise, InnerSpace
- Fan-cooled, enterprise-ready, NDAA-compliant
- In-band or local management via UniFi Controller (v7.3.83+)
-
Ubiquiti UniFi Ultra 210W Switch (USW-Ultra-210W)
- 8 × 1 GbE RJ45 ports – 7 PoE+ output ports, 1 PoE++ input
- Includes 210W power adapter, enabling up to 202W total PoE budget
- 16 Gbps switching capacity, 8 Gbps non-blocking throughput, 11.9 Mpps forwarding rate
- Managed Layer 2 switch with VLANs, STP/RSTP, jumbo frames, and loop protection
- Fanless, silent operation with rugged polycarbonate housing
- Flexible mounting – desktop, wall, or magnetic
- Temperature-tolerant: Operates from –20 °C to +60 °C with adapter
- Managed via UniFi Network Controller v8.0.7+
- NDAA compliant for government and enterprise deployments
-
Ubiquiti UniFi Ultra Switch (USW-Ultra)
- 8 × Gigabit RJ45 ports, including 7 PoE+ output ports and 1 PoE++ input port
- Compact and weather-resistant design with optional 60W or 210W adapters
- 16 Gbps switching capacity, 8 Gbps throughput, 12 Mpps forwarding rate
- Advanced Layer 2 managed features: VLANs, STP/RSTP, port isolation, jumbo frames
- PoE flexibility: 42W output with PoE++ or 210W full-power adapter for extended deployment
- Fanless, silent operation—ideal for desks, ceilings, walls, or poles
- Managed via UniFi Network Controller (v8.0.28+)
- NDAA-compliant, low power draw (~8–9W)
