
MikroTik RBLHGG-60adkit (Wireless Wire Dish Kit)
July 18, 2025
MikroTik CubeG-5ac60ay-SA (CubeSA 60Pro ac)
July 18, 2025MikroTik RBwAPG-60adkit (Wireless Wire Kit)
- Pre-paired devices for instant deployment
- Full-duplex gigabit speed with zero configuration
- 60 GHz interference-free band for high reliability
- Compact and weatherproof design suitable for outdoor mounting
- Integrated directional antenna reduces interference and boosts performance
- Silent operation with no moving parts (fanless)
- RouterOS-powered for advanced network features like VLANs, VPN, and QoS
The MikroTik RBwAPG-60adkit (Wireless Wire Kit), commonly referred to as the Wireless Wire Kit, is a pre-configured pair of MikroTik wAP 60G devices designed to deliver a full-duplex 1 Gbps wireless link over the 60 GHz band. It offers a plug-and-play alternative to short-range Ethernet cabling (up to 200+ meters line-of-sight) with a sleek, weatherproof design suitable for both indoor and outdoor use.
General Specifications
- Product Code: RBwAPG-60adkit
- Product Name: Wireless Wire Kit
- CPU: IPQ-4019 quad-core ARM Cortex-A7
- CPU Frequency: 716 MHz (auto-scaling)
- Architecture: ARM 32-bit
- RAM: 256 MB
- Storage: 16 MB Flash
- RouterOS License Level: 3
- Operating System: RouterOS
- MTBF (Mean Time Between Failures): Approx. 200,000 hours at 25°C
- Operating Temperature Range: -40°C to +70°C
- Ingress Protection Rating: IP55 (dust and water resistant)
- Dimensions (per unit): 185 mm × 85 mm × 30 mm
- Weight (kit): ~900 g
Wireless Specifications
- Wireless Standard: 802.11ad
- Frequency Band: 60 GHz
- Data Rate: Full-duplex 1 Gbps (aggregate 2 Gbps throughput)
- Antenna Type: Integrated directional 60 GHz antenna
- Maximum Range: Up to 200+ meters with clear line-of-sight
- Encryption: WPA2 with AES encryption
- Beamwidth: Narrow directional beam to reduce interference
- Interference Immunity: High, due to 60 GHz spectrum and focused beam
Interfaces & Power
- Ethernet Ports: 1 × Gigabit Ethernet (10/100/1000 Mbps) per unit
- PoE Input: Supports both passive PoE and 802.3af/at (12–57 V)
- DC Jack Input: Supported (12–57 V)
- Max Power Consumption: 5 W (per unit)
- Cooling: Passive (fanless)
- Reset Button: Yes
- LED Indicators: Power, signal, and Ethernet status
Included in the Kit
- 2 × Pre-configured wAP 60G devices
- 2 × Wall/pole mounting kits
- 2 × Gigabit PoE injectors
- 2 × 24 V, 0.38 A power adapters
- 2 × Mounting straps and accessories
- Quick start guide
Ideal Use Cases
- Replacing Ethernet cables between buildings or network cabinets
- Secure and fast office-to-office wireless bridging
- Temporary deployments where cabling isn’t possible
- High-throughput links in clean spectrum environments
Meta Description:
MikroTik RBwAPG-60adkit Wireless Wire Kit offers a pre-configured, full-duplex 1 Gbps 60 GHz wireless link, with gigabit Ethernet, passive PoE, AES encryption, and IP55 weatherproof housing—ideal for short-range, high-speed Ethernet replacement without cables.
| Brand | MikroTik |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
STARLINK STANDARD KIT
The Starlink Standard Kit provides satellite-based high-speed, low-latency internet, making it ideal for remote and rural areas. Below are the key specifications:
- Connect up to 235 devices
- WiFi 6
- Tri Band 4 x 4 MU-MIMO
-
UniFi U6 Mesh (U6-Mesh)
- Wi-Fi 6 (802.11ax) dual-band AP
- 2.4 GHz: up to 573.5 Mbps (2×2 MIMO)
- 5 GHz: up to 2402 Mbps (2×2 MU-MIMO with 160 MHz support)
- Total throughput: ~3 Gbps
- Compact, sleek design for flexible indoor or outdoor use
- Weather-resistant (IPX5) – suitable for sheltered outdoor environments
- 1x Gigabit Ethernet port (802.3af PoE input)
- Mesh-capable – great for wireless uplinks in UniFi networks
- Mounting options included (pole, wall, ceiling)
-
UniFi Dream Wall (UDW)
- Quad-Core ARM CPU @ 1.7 GHz with 4 GB RAM
- 128 GB SSD + 16 GB eMMC + 512 GB microSD
- WiFi 6 (4×4 MIMO) – up to 2.7 Gbps
- 17 LAN ports (incl. PoE, PoE+, PoE++), 10G SFP+ & 2.5G WAN
- PoE budget: up to 420W
- 4.7″ touchscreen for control
- Supports UniFi OS apps: Network, Protect, Access, Talk
- Firewall, IDS/IPS, VPN, VLAN support
- Wall-mountable, fanless, elegant design
-
UniFi Dream Machine Special Edition (UDM-SE)
- Processor: Quad-Core ARM Cortex-A57 @ 1.7 GHz
- RAM: 4 GB DDR4
- Storage: 16 GB eMMC + 128 GB SSD (NVR)
- Ports: 1 × 10G SFP+, 1 × 2.5G RJ45 WAN; 8 × 1G RJ45 (6 PoE, 2 PoE+)
- PoE Budget: 180W
- Security: IDS/IPS, VPN support, Threat Protection
- Display: 1.3″ LCM touchscreen
- Dimensions: 442.4 × 43.7 × 285.6 mm (1U rackmount)
















Reviews
There are no reviews yet.