-
Netstar NS‑ER7‑F1‑13T Indoor Reverse‑PoE Switch with Fiber uplink
- 7 × 10/100 Mbps RJ45 Reverse PoE Ports
- 1 × 10/100 Mbps SC Fiber Uplink Port /13T: 1310 nm TX / 1550 nm RX /15T: 1550 nm TX / 1310 nm RX
- 12V DC Output for powering ONU/ONT
- Port Isolation – downlinks can’t communicate with each other
- Reverse Powered via Ethernet (24–48V DC)
- Surge, Over-Voltage & Over-Current Protection
- Compact Indoor Design (158 × 60 × 50 mm)
- Ideal for Indoor FTTH/FTTB or Office Deployments
-
Netstar NS‑RP071F‑OD Reverse PoE Switch with Fiber Uplink
- 7 × 10/100 Mbps Reverse PoE Ethernet Ports
- 1 × 10/100 Mbps Single-Fiber SC Uplink Port /13T: 1310 nm TX, 1550 nm RX /15T: 1550 nm TX, 1310 nm RX
- Outdoor-Ready Weatherproof Enclosure
- Powered via RPoE (24V DC) – no external AC needed
- Port Isolation for Enhanced Security
- Surge, Over-Voltage & Over-Current Protection
- Cascadable (Up to 4 Units)
- Ideal for FTTH/ISP Outdoor Last-Mile Deployments
-
Netstar NSW‑RPG071E‑V12 Web‑Smart, Indoor Reverse‑PoE Gigabit Switch
- 7 × 10/100/1000 Mbps Reverse PoE Ports (RPoE in)
- 1 × Gigabit Uplink Port
- 12V DC Output for ONU/ONT
- Web Smart L2 Features (VLAN, QoS, Link Aggregation)
- Powered via 24–48V DC over Ethernet
- Auto-Negotiation & Jumbo Frame Support (9K)
- 2K MAC Address Table & 16 Gbps Switching Capacity
- Indoor-Optimized Design (160×95×28 mm, fanless)
-
Netstar NSW‑RPG071E‑V12‑OD2 (Web‑Smart Gigabit Reverse PoE Switch)
- 7 × Gigabit Reverse PoE Ports (RPoE in)
- 1 × Gigabit Uplink Port
- 12V DC Output for powering ONU/ONT
- Web Smart L2 Management (VLAN, QoS, LAG, Port Isolation)
- Powered via 24–48V DC over Ethernet (no AC required)
- Port-based Isolation & Auto-Negotiation
- Surge, Over-Voltage & Over-Current Protection
- Outdoor-Ready Design (–20 °C to +80 °C)
-
Netstar NS‑ER7‑E1‑V12‑OD2 Unmanaged Remote Powered Switch
- 7 × 10/100 Mbps Remote-Powered Ports (RPoE in)
- 1 × 10/100 Mbps Uplink Port
- 12V DC Output to power ONU/ONT
- Remotely powered via 24V DC (no local power needed)
- Port Isolation (downlink ports can’t talk to each other)
- Surge, Over-Voltage & Over-Current Protection
- Auto-Negotiation & Full Duplex Support
- Cascadable Design (chain multiple units)
- Outdoor-Ready & Compact (158×60×50 mm)
-
Netstar 10/100/1000 Web Smart Passive PoE Switch (NSPW-307P01-24V)
- 7× Gigabit 24V Passive PoE Ports
- 1× Gigabit Uplink Port (non-PoE)
- Total PoE Power Budget: 120W
- Web Smart Management (PoE control, VLAN, bandwidth, trunking)
- Surge, Over-Voltage, and Over-Current Protection
- IGMP Snooping & Spanning Tree Protocol
- Port Mirroring & MAC Binding
- 24V Passive PoE Output (up to 100m range)
-
Netstar 8-Port Gigabit Managed Reverse PoE Switch (NSW-RPG071P)
- 8 Gigabit LAN ports + 1 uplink port
- Reverse PoE (24-48V DC) for power-sharing from user devices
- Supports VLAN, QoS, traffic management for optimized network performance
- IEEE 802.3 standards, ensuring stable and efficient data transmission
- 100m max transmission range
- Compact & fan-cooled design for reliable operation
- Ideal for corridor installations & remote networking setups
-
NETSTAR® Gigabit Reverse PoE Switch (NS-8G-RP)
- 7 × Gigabit Reverse PoE input ports
- 1 × Gigabit uplink port (PoE Out or Data Only selectable)
- Selectable 5V or 12V DC output via jack
- Auto speed/duplex detection (10/100/1000 Mbps)
- Port isolation toggle for client security
- Powered via PoE (no external power needed)
- Surge and over-voltage protection
- Supports cascading in larger networks
- Compact and energy-efficient design
-
NETSTAR® Outdoor Reverse PoE Switch (NS-RP071P-OD)
- 7 × 10/100Mbps Remote Powered (PoE In) ports
- 1 × 10/100Mbps PoE Out (24V) uplink port
- Unmanaged, plug-and-play operation
- Supports reverse PoE power feeding (no separate power needed)
- Port isolation for security between clients
- Auto-negotiation for speed and duplex on each port
- Surge, over-voltage, and over-current protection
- Outdoor-ready design, durable for harsh environments
- Supports cascading for network expansion
