-
MikroTik RB952Ui-5ac2nD (hAP ac lite)
- Dual-band concurrent 2.4 GHz and 5 GHz Wi-Fi
- 5 Fast Ethernet ports with PoE-in and PoE-out support
- USB port for modem or storage expansion
- Compact and wall-mountable indoor design
- RouterOS with Level 4 license for advanced networking
- Passive cooling, fanless operation
- Affordable and efficient SOHO wireless solution
-
MikroTik RB951Ui-2nD (hAP)
- 2.4 GHz Wi-Fi (802.11b/g/n) with 2×2 MIMO, up to 300 Mbps
- 5 × Fast Ethernet ports (10/100 Mbps)
- PoE output on port 5 (up to 500 mA)
- USB 2.0 port for storage or 3G/4G modem
- 650 MHz CPU with 64 MB RAM
- RouterOS with Level 4 license
- Passive cooling (fanless)
- Compact plastic desktop case
- Power via DC jack or passive PoE input
-
MikroTik L41G-2axD (hAP ax lite)
- Wi‑Fi 6 single‑band (2.4 GHz) with up to 574 Mbps (AX600)
- Dual-chain antenna with 4.3 dBi gain
- Dual‑core IPQ‑5010 CPU at 800 MHz
- 256 MB RAM and 128 MB NAND storage, running RouterOS v7 (License Level 4)
- 4 × Gigabit Ethernet ports with MT7531BE switch chip
- USB‑C power input, supports 5 V (up to ~8 W)
- Compact, fanless design (IP20), operating from –40 °C to +70 °C
- Mode button for quick reset or config
-
MikroTik RB941-2nD-TC (hAP lite TC)
- 2.4 GHz Wi-Fi with 300 Mbps throughput (802.11b/g/n)
- 2×2 MIMO with integrated antennas (~1.5 dBi gain)
- 4 × Fast Ethernet (10/100 Mbps) ports
- 650 MHz CPU and 32 MB RAM
- Powered via USB-C or MicroUSB (5–12 V input)
- RouterOS with Level 4 license
- Configurable LED indicators
- Compact, tower-style passive design
-
MikroTik RB941‑2nD (hAP lite)
- 2.4 GHz Wi-Fi (802.11b/g/n) with up to 300 Mbps
- 2×2 MIMO integrated antennas (1.5 dBi gain)
- 4 × Fast Ethernet (10/100 Mbps) ports
- QCA9533 CPU @ 650 MHz
- 32 MB RAM and 16 MB Flash storage
- Powered via MicroUSB (5V, 0.7A)
- RouterOS with Level 4 license
- Compact, fanless design for silent operation
- Integrated WPS and reset buttons
-
MikroTik CubeG-5ac60aypair (Wireless Wire Cube Pro)
- Ultra-fast 60 GHz 802.11ay point-to-point link
- Pre-paired for true plug-and-play deployment
- Built-in 5 GHz radio for automatic failover
- High-gain directional antennas for focused beam and minimal interference
- Integrated GPS for synchronization and diagnostics
- Silent, passive cooling
- Reliable performance in short- to mid-range building-to-building applications
- Fiber-like performance without trenching or cabling
-
MikroTik CubeG-5ac60ay (Cube 60Pro ac)
- 802.11ay support for increased range, stability, and channel bonding
- Compact & aesthetic design for clean rooftop or balcony installations
- High-gain directional antenna for focused signal delivery
- Integrated 5 GHz failover ensures connection stability
- RouterOS L3 license provides rich software functionality
- Passive & silent cooling for long-term operation
- Ideal client device for CubeSA-60Pro-ac or other MikroTik 60 GHz base units
-
MikroTik CubeG-5ac60ay-SA (CubeSA 60Pro ac)
- Sector coverage for 60 GHz PtMP deployment (up to 8–10 clients)
- High-throughput 60 GHz connectivity with low interference
- Automatic failover to 5 GHz ensures always-on connectivity
- Pre-installed RouterOS with advanced routing and management features
- Integrated GPS for time and frequency synchronization
- Excellent thermal and mechanical stability with passive cooling
- Compact, durable, and visually discreet design
-
MikroTik RBwAPG-60adkit (Wireless Wire Kit)
- Pre-paired devices for instant deployment
- Full-duplex gigabit speed with zero configuration
- 60 GHz interference-free band for high reliability
- Compact and weatherproof design suitable for outdoor mounting
- Integrated directional antenna reduces interference and boosts performance
- Silent operation with no moving parts (fanless)
- RouterOS-powered for advanced network features like VLANs, VPN, and QoS
-
MikroTik RBLHGG-60adkit (Wireless Wire Dish Kit)
- Pre-paired out of the box for immediate deployment
- Gigabit full-duplex throughput using 60 GHz wireless
- High-gain, narrow beam antenna (~42 dBi) ensures minimal interference
- Compact, weatherproof mesh dish design handles outdoor elements
- Long-range point-to-point support up to 1.5 km
- Passive and 802.3af/at PoE compatibility for flexible power options
- Built-in aim tool simplifies precision alignment
-
MikroTik RBLHGG-60ad (LHG 60G)
- High-gain 42 dBi parabolic antenna for long-range, narrow-beam performance
- 1 Gbps full-duplex throughput over 60 GHz
- Interference-free band with low latency
- IP55-rated enclosure for all-weather operation
- PoE-powered with Gigabit Ethernet
- Supports both PtP and PtMP modes
- Passive cooling system for silent operation
- Integrated aim tool for precise alignment
-
MikroTik RBwAPG-60ad (wAP 60G)
- High-Speed 60 GHz PtP Wireless Link – Fiber-speed performance without the cable
- Low Interference Band – Operates in the uncongested 60 GHz frequency
- Integrated 23 dBi Directional Antenna – Stable, focused wireless link
- Gigabit Ethernet Port – Seamless backhaul or LAN integration
- Passive and Active PoE Support – Flexible powering options
- Weatherproof Enclosure – IP54-rated for harsh environments
- Lightweight & Compact – Ideal for discreet installations
- RouterOS Level 3 License – Perfect for CPE or point-to-point setup
-
MikroTik RBwAPG-60ad-A (wAP 60G AP)
- 60 GHz Wireless Technology – High-speed, interference-free connectivity up to 1 Gbps
- Point-to-Multipoint Support – Connects up to 8 clients simultaneously
- Gigabit Ethernet Port – Fast wired data backhaul
- Compact & Weatherproof Design – IP54-rated for indoor/outdoor use
- Integrated 23 dBi Antenna – Beamforming for stable and focused signal
- Low Power Consumption – Max 5 W with passive or 802.3af/at PoE
- Silent Operation – Fanless passive cooling
- RouterOS with Level 4 License – Advanced routing, firewall, and wireless control
- Easy Mounting – Includes wall and pole mounting kit
- Wide Temperature Range – Operates from -40°C to +70°C
-
MikroTik RBOmniTikPG‑5HacD – OmniTik 5 PoE ac AP & PoE
- Outdoor-grade 5 GHz AP/CPE with 867 Mbps dual-stream
- Two integrated 7.5 dBi omni antennas covering 360°
- Five Ethernet ports with PoE input and four-pass-through PoE output
- Passive cooling in an IP54 enclosure, wide temperature range
- Powered via 12–57 V and powers other devices (802.3af/at)
- USB expansion port and hardware-accelerated switching
- Full RouterOS L4 platform with robust routing and wireless tools
- Ideal for hotspot hubs, AP hubs, or aggregated CPE installs
-
MikroTik RBOmniTikG‑5HacD – OmniTik 5 ac AP
- Outdoor dual-band 2×2 MIMO Wi-Fi with up to 867 Mbps
- Integrated wide-angle omni antenna in rugged housing
- Dual Ethernet ports with PoE passthrough capability
- RouterOS Level 4 features including routing and VPN
- Passive, fanless design with wide temperature tolerance
- Ideal for location-based coverage or multi-device connections
-
MikroTik RBMetalG‑52SHPacn – MetalG 52 SH ac
- Rugged outdoor metal housing, –40 °C to +70 °C
- Dual-band 2×2 MIMO Wi‑Fi with high-gain integrated antenna
- Reliable throughput: ~300 Mbps (2.4 GHz), ~867 Mbps (5 GHz)
- Gigabit Ethernet with passive PoE power-in
- External antenna support via RP‑SMA
- Full RouterOS L4 functionality
- Low power consumption and passive cooling
- Ideal for long-range PTP/PMP and outdoor router uses
-
MikroTik RBGrooveGA‑52HPacn – GrooveA 52 ac CPE/AP
- Dual‑band outdoor Wi‑Fi 5 (single‑chain) with 433 Mbps throughput
- Integrated N‑male antenna connector with omni antenna included
- Gigabit Ethernet with PoE power
- Rugged design: IP55-rated, –40 °C to +70 °C, passive cooling
- RouterOS L4 functionality with QCA9556 CPU and 64 MB RAM
- Low power consumption (~5 W) with passive PoE
- Ideal for outdoor PTP, PMP, or small AP deployments
-
MikroTik RB922UAGS‑5HPacD‑NM (NetMetal 5)
- Rugged IP54-rated weatherproof casing
- 720 MHz CPU, 128 MB RAM, RouterOS L4
- Dual-chain 5 GHz Wi‑Fi 5 with 867 Mbps speed
- Gigabit Ethernet + 1.25 Gbps SFP + USB + miniPCIe
- External antenna support with RP‑SMA connectors
- Passive PoE-in and low power usage (~19 W)
- Industrial operating range (–40 °C to +70 °C)
- Onboard sensors and alert beeper
-
MikroTik RBSXTG‑5HPacD‑SA – SXTsq 5ac Wide Sector Outdoor CPE
- Outdoor 5 GHz sector CPE with integrated wide‑beam antenna
- High-performance 867 Mbps 802.11ac throughput
- Single-core 720 MHz CPU, 128 MB RAM, RouterOS L4
- Gigabit Ethernet with passive PoE (12–57 V)
- Fanless, durable IP54 housing withstands –40 °C to +70 °C
- USB port, voltage/temp monitoring, and alert beeper
- Supports advanced protocols: Nv2, Nstreme, IPsec offloading
- Compact and easy to install with included mounting kit
-
MikroTik RBLHGG-5acD-XL4pack – LHG XL 5 ac 4-Pack
- High-performance 5 GHz wireless CPE with 27 dBi antenna
- 867 Mbps dual-chain 802.11ac throughput
- Quad-core CPU and 256 MB RAM for strong performance
- IPsec hardware acceleration and RouterOS features
- Passive PoE support (10–30 V)
- Ideal for long-range PTP or client connections
- Ultra-narrow 7° beamwidth reduces interference
- Rugged outdoor-ready grid antenna structure
- Efficient power usage (~7–8 W per unit)
- Includes four units for cost-effective deployment
-
MikroTik RBSXTsqG‑5acD – SXTsq 5ac Outdoor 5GHz CPE
- Compact outdoor 5 GHz CPE
- Integrated 16 dBi directional antenna
- Dual-chain 802.11ac Wi-Fi with up to 867 Mbps throughput
- Gigabit Ethernet port with passive PoE-in support
- Rugged, weather-resistant IP54 housing
- Quad-core CPU and 256 MB RAM for stable performance
- Low power consumption (max 7 W)
- Ideal for point-to-point links and client-side wireless setups
-
MikroTik L22UGS‑5HaxD2HaxD‑15S – mANTBox ax 15s
- Dual-band 802.11ax (Wi-Fi 6) with 2×2 MIMO
- Integrated 15 dBi (5 GHz) and 12 dBi (2.4 GHz) sector antennas
- 1x Gigabit PoE-in port and 1x 2.5G-capable SFP cage
- Dual-core ARM processor and 256 MB RAM
- USB 2.0 expansion port
- Rugged outdoor housing with wide temperature tolerance
- WPA3 support and modern wireless efficiency features
- Fully passive cooling for silent operation
- Designed for long-range point-to-multipoint deployments
-
MikroTik L23UGSR‑5HaxD2HaxD‑NM (NetMetal ax) – Outdoor Wi‑Fi 6
- Dual-band Wi-Fi 6 with 2×2 MIMO, delivering strong outdoor speeds
- Ethernet + 2.5 Gbps SFP + USB + miniPCIe for flexible wired/fiber setups
- 4 external antenna ports for long-range or directional links
- Dual power inputs and passive PoE with low power use
- Rugged IP 66 housing and wide temperature range for harsh environments
- Sensors and beeper for health monitoring and alerts
- Expandable via LTE/LoRa modules using miniPCIe + NanoSIM
- RouterOS v7 (L4) for complete routing and network control
-
MikroTik L11UG‑5HaxD‑NB – NetBox 5 ax Wi‑Fi 6 Outdoor RouterBoard
- Dual-Core 800 MHz IPQ-5010 CPU + 256 MB RAM
- 5 GHz Wi‑Fi 6 (dual-chain), up to 2.4 Gbps
- Gigabit PoE-in + USB 2.0 port
- Passive cooling, industrial temp range
- External antenna support via MMCX/RP‑SMA
- Sensors (voltage/temp) & alert beeper
- RouterOS v7 with flexible outdoor firmware
- Dual power inputs: PoE or DC jack
- Pole/tower mounting hardware included
-
MikroTik CRS520-4XS-16XQ-RM – Ultra-Fast 100 GbE Layer 3 Switch
- 16× 100G QSFP28 ports + 4× 25G SFP28 + 2× 10G RJ45
- ARM 64-bit 2 GHz quad-core CPU + 4 GB RAM
- 200 Gbps switching capacity with 138 Mpps forwarding
- Layer 3 hardware offloading for OSPF/BGP/MPLS
- Dual hot-swappable AC power supplies (redundant)
- 4× hot-swap fans with smart cooling
- Advanced RouterOS v7 features + IPsec, VLAN, VRRP, ACL
- Enterprise-ready 1U rackmount form factor
-
MikroTik CRS518-16XS-2XQ-RM – Enterprise 10G/40G Layer 3 Switch
- 16× 10G SFP+ & 2× 40G QSFP+ Ports
- 640 Gbps Switching Capacity & 357 Mpps Throughput
- Dual Boot with RouterOS v7 & SwOS Support
- Dual Redundant Hot-Swappable AC Power Supplies
- 1U Rackmount Form Factor with Industrial-Grade Design
- Marvell Prestera ALDRIN2 Chipset for Hardware Offloading
- Out-of-Band Management Port & Console Access
- Advanced VLANs, ACLs & L3 Routing Capabilities
- Ideal for Enterprise, ISP, and Data Center Environments
- Redundant Cooling with Intelligent Fan Control
-
MikroTik CRS510-8XS-2XQ-IN – 10G/40G Layer 3 Switch
- 8× 10G SFP+ & 2× 40G QSFP+ Ports
- 200 Gbps Switching Throughput & 100 Mpps
- Dual Boot OS: RouterOS v7 & SwOS
- Compact, Actively-Cooled Desktop Chassis
- Hot-Swap Dual Power Supplies (Redundant DC)
- Marvell Prestera Switch Chipset for Wire-Speed Forwarding
- Management Port (1G Ethernet) + Serial Console + USB
- Ideal for Edge Aggregation and Core Infrastructure
- Supports VLANs, L3 Routing, Port Isolation & ACLs
- Reliable Fan Control and Efficient Thermal Design
-
MikroTik CRS354-48P-4S+2Q+RM – 48-Port PoE+ Layer 3 Managed Switch
- 48× Gigabit Ethernet PoE+ Ports (802.3af/at)
- 4× 10G SFP+ Uplinks and 2× 40G QSFP+ for high-speed core
- 750W Total PoE Budget with up to 30W per port
- Dual Boot: RouterOS (Layer 3) and SwOS (switch-focused)
- Dual Hot-Swap Power Supplies for Redundancy
- 168 Gbps Switching Capacity & 126 Mpps Throughput
- Full VLAN, ACL, and Routing Support
- Fan-cooled Metal Enclosure (1U Rackmount)
- Enterprise-Class Design with Simple Web Management
- Ideal for Large-Scale IP Surveillance and WiFi Deployments
-
MikroTik CRS326-4C+20G+2Q+RM – Cloud Router Switch
- 26 Total Ports: 20× Gigabit, 4× combo (RJ45/SFP+), 2× QSFP+ 40G
- High Throughput: 168 Gbps switching capacity
- Dual Boot: RouterOS and SwOS support
- Dual AC Inputs: Power redundancy for critical uptime
- Hardware Offloading: Wire-speed switching performance
- 1U Rackmount Design: Fits standard network racks
- Advanced VLAN & Port Isolation Capabilities
- Enterprise-Grade Build Quality with Active Cooling
- Hot-swappable Power Inputs for Stability
- Ideal for Aggregation or Distribution Layer Roles
-
Ubiquiti airFiber 60 Xtreme-Range – (AF60-XR) P-to-P Bridge
- Extended Range: Up to 15 km over 60 GHz band
- Ultra-High Throughput: Up to 6 Gbps aggregate
- 44.8 dBi Integrated Antenna: Massive directional gain
- Automatic Beamforming: Precision alignment and link stability
- Dual 10G Interfaces: 10G SFP+ and 2.5G Ethernet
- 5 GHz Failover Link: 867 Mbps backup capacity
- GPS Synchronization: Co-location and interference control
- Sub-1 ms Latency: Real-time traffic performance
- IP67-Rated Enclosure: Outdoor-ready durability
- UISP Integration: Seamless remote management and diagnostics
-
Ubiquiti airFiber 60 XG – (AF60-XG) P-to-P Bridge
- Up to 6 Gbps Aggregate Throughput
- 4 km Range over 60 GHz Band
- Auto Beamforming with 38 dBi Antenna
- Dual 10G Ports (RJ45 + SFP+)
- 5 GHz Backup Radio (867 Mbps)
- Sub-1 ms Latency for Low-Lag Applications
- IP67 Weatherproof Design
- GPS Sync for Co-located Deployments
- Adaptive Modulation for Link Stability
- UISP Integration for Remote Monitoring
-
Ubiquiti airFiber 60 Long-Range – (AF60-LR) P-to-P Bridge
- Long-Range Performance: Up to 12 km over 60 GHz
- High-Speed Throughput: Up to 1.8 Gbps full-duplex
- 38 dBi Integrated Antenna: Precision directional beam
- Automatic Beamforming: Ensures optimal link alignment
- Low Latency: Sub-1 ms for real-time applications
- Weatherproof Build: IP67-rated for harsh outdoor conditions
- Low Power Consumption: Only 11W max via passive PoE
- 5 GHz Management Radio: Separate access channel
- Compact & Lightweight: Easy to install with included mount
- UISP Support: Centralized monitoring and remote configuration
-
Ubiquiti airFiber 60 HD – (AF60-HD) P-to-P Radio
- Ultra-High Throughput: Up to 6 Gbps aggregate capacity over 60 GHz band
- Long-Range Performance: Up to 2+ km with low latency (<1 ms)
- Integrated 43 dBi Antenna: High-gain directional antenna for precise targeting
- Automatic Beamforming: Ensures optimal alignment and signal stability
- Backup 5 GHz Radio: Failover link with up to 867 Mbps capacity
- 10G SFP+ & 2.5G Ethernet Ports: High-speed connectivity options
- Robust Build: IP67-rated enclosure for all-weather outdoor use
- GPS Synchronization: Reduces interference and improves co-location performance
- Low Power Draw: Max power consumption of only 18W
- UISP-Ready: Centralized management via Ubiquiti’s platform
-
Tycon POE-PowerTap – RJ45 Connector
- Interfaces PoE input (active or passive) to 44–57 VDC terminal output
- Supports up to 90 W/2 A with high-efficiency (~98%) conversion
- Rugged metal body with LED status indicator and optional mounting
- Compact dimensions (32×13×15 mm), ultra-lightweight (5 g)
- Wide temperature range (–40 to +70 °C) and high humidity tolerance
- Robust surge/ESD protection and built-in overload safety
- Industry-grade reliability (MTBF ~962k hrs), RoHS-compliant
- Backed by a 3‑year limited warranty
-
Tycon POE‑EXT‑GD‑HP Gigabit PoE Extender
- Extends PoE and Gigabit Ethernet up to an additional 100 meters
- Compatible with IEEE 802.3af/at and 44–57 V passive PoE sources
- Supports up to 25 W PoE output power
- Compact, rugged IP66 aluminum enclosure for harsh outdoor environments
- No external power source needed—fully PoE-powered
- Supports 10/100/1000 Mbps data rates
- Enables multi-hop PoE extension up to 300 meters with multiple units
- Plug-and-play, no configuration required
- Built-in surge protection and reliable long-term operation
-
Tycon TP-DCDC-1224 – DC to DC Converter
- Converts 9–36 VDC to regulated 24 VDC PoE output at ~20 W
- Dual isolated inputs for redundant power sources
- Integrated 10/100 MB passive PoE injector via RJ‑45 output
- Compact form factor, optional metal enclosure, DIN-rail compatible
- Built-in protections against surge, overload, short circuit, and reverse polarity
- Operational from –30 °C to +60 °C with high humidity tolerance
- Low noise/ripple, high reliability (MTBF ~166k hrs)
- Compliance with FCC, CE, EN/IEC safety standards; backed by a 3-year warranty
-
Tycon TP-VRHP-4824 Voltage Converter
- Wide 36–72VDC input voltage range
- Regulated 24VDC output at 2.9A (70W)
- High isolation: 1500VDC between input and output
- Overvoltage, overload, and short-circuit protection
- Durable metal case with DIN rail mounting
- Fanless, passive-cooled design for silent operation
- High efficiency (>85%) and low ripple
- Industrial-grade operating temp: –30°C to +65°C
- RoHS compliant with typical 3-year warranty
-
Tycon TP-VRHP-4856 Voltage Converter
- Wide input range: 36–72VDC
- Regulated 56VDC output @ 1.25A (70W)
- High isolation: 1500VDC between input and output
- Overload, overvoltage, and short-circuit protection
- Integrated low-voltage disconnect (LVD)
- Rugged metal enclosure with DIN rail mounting
- High efficiency: >85%
- Operating temperature: –30°C to +65°C
- RoHS compliant with 3-year warranty
-
Tycon TP-VR-2412 Voltage Regulator
- Converts 18–32VDC input to a regulated 12VDC output
- Provides up to 1.25A (15W) of continuous output power
- Compact, rugged, and weather-resistant housing
- Long 18 AWG wire leads for flexible installation
- Built-in short-circuit and overload protection
- Wide temperature range operation for harsh environments
- Ideal for remote power systems and low-voltage electronics
-
Tycon TP-DCDC-4824G-HP – DC to DC Converter
- Converts 36–72VDC input to regulated 24VDC output
- Delivers up to 50W continuous power
- Integrated Gigabit passive PoE injector (pins 4,5 + / 7,8 −)
- High efficiency >90% for low heat and power loss
- Wide operating temperature: -40°C to +70°C
- Built-in protections: ESD, surge, short circuit, and reverse polarity
- Compact, rugged enclosure with mounting tabs
- Ideal for high-power IP cameras, radios, and industrial gear
