-
Tycon POE-PowerTap – RJ45 Connector
- Interfaces PoE input (active or passive) to 44–57 VDC terminal output
- Supports up to 90 W/2 A with high-efficiency (~98%) conversion
- Rugged metal body with LED status indicator and optional mounting
- Compact dimensions (32×13×15 mm), ultra-lightweight (5 g)
- Wide temperature range (–40 to +70 °C) and high humidity tolerance
- Robust surge/ESD protection and built-in overload safety
- Industry-grade reliability (MTBF ~962k hrs), RoHS-compliant
- Backed by a 3‑year limited warranty
-
Tycon POE‑EXT‑GD‑HP Gigabit PoE Extender
- Extends PoE and Gigabit Ethernet up to an additional 100 meters
- Compatible with IEEE 802.3af/at and 44–57 V passive PoE sources
- Supports up to 25 W PoE output power
- Compact, rugged IP66 aluminum enclosure for harsh outdoor environments
- No external power source needed—fully PoE-powered
- Supports 10/100/1000 Mbps data rates
- Enables multi-hop PoE extension up to 300 meters with multiple units
- Plug-and-play, no configuration required
- Built-in surge protection and reliable long-term operation
-
Tycon TP-DCDC-1224 – DC to DC Converter
- Converts 9–36 VDC to regulated 24 VDC PoE output at ~20 W
- Dual isolated inputs for redundant power sources
- Integrated 10/100 MB passive PoE injector via RJ‑45 output
- Compact form factor, optional metal enclosure, DIN-rail compatible
- Built-in protections against surge, overload, short circuit, and reverse polarity
- Operational from –30 °C to +60 °C with high humidity tolerance
- Low noise/ripple, high reliability (MTBF ~166k hrs)
- Compliance with FCC, CE, EN/IEC safety standards; backed by a 3-year warranty
-
Tycon TP-VRHP-4824 Voltage Converter
- Wide 36–72VDC input voltage range
- Regulated 24VDC output at 2.9A (70W)
- High isolation: 1500VDC between input and output
- Overvoltage, overload, and short-circuit protection
- Durable metal case with DIN rail mounting
- Fanless, passive-cooled design for silent operation
- High efficiency (>85%) and low ripple
- Industrial-grade operating temp: –30°C to +65°C
- RoHS compliant with typical 3-year warranty
-
Tycon TP-VRHP-4856 Voltage Converter
- Wide input range: 36–72VDC
- Regulated 56VDC output @ 1.25A (70W)
- High isolation: 1500VDC between input and output
- Overload, overvoltage, and short-circuit protection
- Integrated low-voltage disconnect (LVD)
- Rugged metal enclosure with DIN rail mounting
- High efficiency: >85%
- Operating temperature: –30°C to +65°C
- RoHS compliant with 3-year warranty
-
Tycon TP-VR-2412 Voltage Regulator
- Converts 18–32VDC input to a regulated 12VDC output
- Provides up to 1.25A (15W) of continuous output power
- Compact, rugged, and weather-resistant housing
- Long 18 AWG wire leads for flexible installation
- Built-in short-circuit and overload protection
- Wide temperature range operation for harsh environments
- Ideal for remote power systems and low-voltage electronics
-
Tycon TP-DCDC-4824G-HP – DC to DC Converter
- Converts 36–72VDC input to regulated 24VDC output
- Delivers up to 50W continuous power
- Integrated Gigabit passive PoE injector (pins 4,5 + / 7,8 −)
- High efficiency >90% for low heat and power loss
- Wide operating temperature: -40°C to +70°C
- Built-in protections: ESD, surge, short circuit, and reverse polarity
- Compact, rugged enclosure with mounting tabs
- Ideal for high-power IP cameras, radios, and industrial gear
-
Tycon TP-DCDC-4824G – DC to DC Converter
- Converts 36–72VDC input to regulated 24VDC output
- Integrated passive PoE injector (pins 4,5 V+ and 7,8 V−)
- Delivers up to 24W continuous, 30W peak power
- High efficiency >90% for low heat generation
- Built-in protections: surge, ESD, short-circuit, reverse polarity
- Wide operating temperature: -40°C to +70°C
- Compact, lightweight, and easy to install
- Ideal for IP cameras, wireless radios, and industrial devices
-
Tycon TP-DCDC-1248 – DC to DC Converter
- Converts 12VDC to regulated 48VDC Passive PoE
- 17W max output power
- 85% power efficiency
- Wide 9–36VDC input range
- High isolation (1500VDC)
- Built-in surge, short circuit, and reverse polarity protection
- Compact, rugged aluminum enclosure
- DIN rail or surface mountable
- Operates from -40°C to +70°C
- CE and RoHS compliant
-
Tycon PowerSens™ TPDIN-Monitor-WEB3
- Web & SNMP remote access
- 4 voltage inputs (0–80 VDC)
- 4 current inputs (including ±10 A & external shunt)
- 2 temperature sensors (internal & external)
- 4 relays (2 NC, 2 NO), 10 A rated
- Built-in data logging (4,048 records)
- Auto control via thresholds, ping, or schedules
- Email alert notifications
- PoE or 10–57 VDC power input
- DIN rail mount, -40°C to +75°C operation
-
Shield X1, 1 – 12KW, Inverter-charger
- Rated power of 1KW to 12KW.
- Pure sine wave output, ideal for all equipment.
- 3 times the surge power.
- Adjustable charge current for various applications (25%, 50%, 75%, 100%).
- LED and LCD readings for diagnosis and reporting.
Limited Offer: KES 48,000 + VAT
-
Tripp Lite Heavy-Duty PDU Power Cord Back to back cable with c13 -c14 pin
Computer power extension cord connects devices with C13/C14 power connectors or extends your existing power connection by 3 ft.- Recommended for powering computers, servers and other network devices.
- 3-ft. (0.91 m) length allows flexibility in placing devices, while avoiding cable clutter.
- PDU-style cord replaces or upgrades standard power cord provided by manufacturer.
- Thick 14 AWG wire gauge manages high power levels required for larger equipment.
- This product is covered by a Lifetime Limited Warranty.
-
Tripp Lite series Power Extension Cord, C19 to C20 – Heavy-Duty 1.83 m
C19 to C20 20A heavy-duty extension cable connects high-output devices with C19/C20 power connectors, including blade server chassis.- Recommended for powering servers, routers and other high-output network devices.
- 6-ft. (1.83 m) length allows flexibility in placing devices in relationship to AC outlet.
- C20 to C19 cord replaces or upgrades standard power cord provided by manufacturer.
- Thick 12 AWG wire gauge manages high power levels required for larger equipment.
- This product is covered by a Lifetime Limited Warranty.
-
UK Computer Power Cord, C19 to BS1363, 13A, 250V, 2.43m, Black
- UK power cord delivers electricity from a BS 1363 wall outlet to a network device with a C20 inlet, such as
a blade server, PDU or UPS.
Features - UK IEC Power Cord with C19 to BS 1363 Connection for Powering Network Devices This BS 1363
power cord is designed for blade server chassis, switches, routers, PDUs, UPS systems and other
network devices. It features a BS 1363 plug for connecting to a wall outlet and a C19 plug for connecting
to a device. The 8-ft. (2.43 m) length allows you great flexibility in placing equipment with respect to the
power outlet.
- UK power cord delivers electricity from a BS 1363 wall outlet to a network device with a C20 inlet, such as
-
SmartRack Roof-Mounted Fan Panel – 6 208/240V high-performance fans
- Roof Mount Fan Panel – 208-240V.
- Ideal for increasing the ventilation of SmartRacks.
- Features (6) 208-240V fans mounted in a roof panel.
- Tooless mounting hardware included.
- Cold rolled steel with black finish.
- 2-year limited warranty.
-
SmartRack 9U Low-Profile Switch-Depth Wall-Mount Mini Rack Enclosure
Houses, secures and organizes switches and other rack-mount equipment in server closets, classrooms, offices and other areas with limited floor space.
- 9U rack constructed from powder-coated steel that stands up to tough environments.
- Houses switches, routers and other equipment up to maximum 200 lb. load capacity.
- Doors and side panels lock securely to help prevent damage, tampering or theft.
- Ships fully assembled for immediate deployment and equipment mounting.
- Provides physical equipment and media security required for PCI DSS compliance.
- 5-year limited warranty.
-
SmartRack 6U Low-Profile Switch-Depth Wall-Mount Mini Rack Enclosure
Houses, secures and organizes switches and other rack-mount equipment in server closets, classrooms, offices and other areas with limited floor space.
- 6U rack constructed from powder-coated steel that stands up to tough environments.
- Houses switches, routers and other equipment up to maximum 200 lb. load capacity.
- Doors and side panels lock securely to help prevent damage, tampering or theft.
- Ships fully assembled for immediate deployment and equipment mounting.
- Provides physical equipment and media security required for PCI DSS compliance.
- 5-year limited warranty.
-
Tripp-Lite series 3.7kW Single-Phase Local Metered PDU, 208/230V 38 Outlets
- Local metered single phase 16A 208/230V 0U 63.75in / 162cm vertical rackmount PDU.
- Two-digit meter reports output current in amps.
- 10ft / 3m detachable input cable with NEMA L6-20P plug.
- C20 inlet accepts a variety of 16A international cordsets.
- 38 output receptacles (6 C19, 32 C13).
- Ready for immediate toolless 0U installation.
- 2-year limited warranty.
-
Tripplite SmartPro 1.5kVA 1.5kW, 2.2kVA 1.92kW, Line-Interactive UPS
- 1.5kVA / 1.5kW, 2.2kVA / 1920W line interactive 2U rack/tower UPS, Sine Wave.
- Extended runtime options up to 1600W, 0.9 Power Factor, Interactive LCD interface.
- 98% line-mode efficiency, 2 switched load banks, 4 post mounting kit.
- USB, RS232, EPO and slot for network management card options.
- 230V C20 inlet, 8 C13 outlets.
- Optional WEBCARDLX with latest version of PADM20 supports Auto Probe feature.
-
Tripplite SmartPro 2.2 KVA Line Interactive UPS, (SMARTINT2200VS)
- SmartPro 2.2 KVA Line Interactive UPS, Extended-run & SNMPWEBCARD options, Tower, USB, Serial, EPO, 230V.
- 2200VA/1600W capacity.
- Internal batteries support a half load of 1100VA for 19 minutes and a full load of 2200VA for 7 minutes.
- Intelligent battery management system extends battery life.
- Maintains regulated 230V nominal output during brownouts and overvoltages from 151 to 282V.
-
Tripplite SmartPro 230V 1.5kVA 900W Line-Interactive UPS, LCD, 8 Outlets
1500 va 900 watts tower model tripplite ups , line interactive model, 1.5 va model, 8 nos of C13 outlets.
- Corrects under- and overvoltages from 170V to 280V
- 8 C13 outlets—2 surge-only
- Interactive LCD monitoring screen
- Monitoring of power conditions via PowerAlert software
- 10 min. runtime at half load
-
Tripplite 1kVA 600W Line-Interactive UPS with 8 C13 Outlets
1 kva tripplite ups model, 600 watts output. Line interactive model, 8 nos of C13 output.
-
Magnizon-3-PH UPS, 20KW, 30KW
MU20KXL MAGNZION True online double conversion, 20 kva ups , 20,000 watts (MU20KXL) 30 kva ups , 30,000 watts (MU30KXL) with unity power factor, dual input mode and external battery bank model with battery capacity of 32 to 40 nos
-
Magnizon-Smart Online Rack/Tower Mount UPS 1KW, 2KW, 6KW, 10KW
1kw, 2kw,6kw, 10kw rack mount true online double conversion ups with free rack to tower kit and rack rail kit
(MU1000RM2U, MU2000RM3U, MU6000RM3U, MU10000RM3U)
-
Magnizon-Smart Line Interactive UPS, 650VA/360W (MU650VA)
Magnizon 650va line interactive ups model, with 360 watts output. 2 x c13 and 2 x universal outputs
-
Magnizon 10KVA/10KW Smart On-Line Ups (MUT10KL)
Magnizon MUT10KL 10KVA/10KW smart on-line, double-conversion UPS, Input power factor above 0.99 and Output power factor of 1.0(unity power factor) , Parallel port to connect up to 8nos of 10kva as option
-
Magnizon 6KVA/6KW Smart On-Line Ups (MUT6KL)
Magnizon MUT6KL 6KVA/6KW smart on-line, double-conversion UPS, Input power factor above 0.99 and Output power factor of 1.0(unity power factor), Parallel port to connect up to 8nos of 6KVA as option
-
Magnizon-Solar Water Pumping System 5.5HP,7.5HP,10HP
Magnizon 5.5HP/4KW, 7.5HP/5.5KW, 10HP/7.5KW nominal capacity Solar PV operated MPPT based 100-500V DC input and or 3-Ph, 380-415V, 50Hz input (dual input) and 3-Ph 380V-415V, 0-400Hz output vector controlled VFD based smart variable drive for water pumping systems
2 years warranty
-
Magnizon Backup Inverter – Without solar Mppt 4KW – 8KW /230VAC -50Hz
Magnizon Pure sine wave solar inverter with battery charger 4000W, 5000W, 6000W, 8000W with large LCD display and 45Amp charger capacity, 4000W/230VAC -50Hz; Input Voltage 153-267V, DC: 24V , Solar mode & UPS mode, RS232 / GENERATORS ON / OFF compatibility.
2 years warranty
-
Magnizon Hybrid inverter with – Solar Mppt 4KW – 10KW /230VAC -50Hz
Magnizon Pure sine wave transformer based solar inverter hybrid with dual battery charger 4000W with large LCD display and 50Amp charger capacity & built in 60Amp MPPT charger, 4000W, 5000W, 8000W, 10000W/230VAC -50Hz; Input Voltage 153-267V, DC: 24V, 48V , Solar mode & UPS mode.
2 years warranty
-
Magnizon 3KVA/2.4KW, 6KVA/4.8KW, 230VAC -50Hz Hybrid Inverters
Magnizon 3KVA/2.4KW, 230VAC -50Hz; Input Voltage 153-267V, 2400Watts/24V DC smart pure sinewave inverter with built in 40Amp Battery charger
Magnizon 6KVA/4.8KW, 230VAC -50Hz; Input Voltage 153-267V, 4800Watts/48V DC smart pure sinewave inverter with built in 40Amp Battery charger
-
Magnizon 1KVA/750W, 2KVA/1.5KW, 230VAC -50Hz Hybrid Inverters
Magnizon 1KVA/750W, 230VAC -50Hz; Input Voltage 153-267V, PWM sine wave 700Watts/12V DC Hybrid Solar inverter with built in 40Amp charge controller with LCD display & 15Amp battery charger (AC Mode). 1-year warranty. IGBT product suitable for home application.
Magnizon 2KVA/1.5KW, 230VAC -50Hz; Input Voltage 153-267V, PWM sine wave 1500Watts/24V DC Hybrid Solar inverter with built in 40Amp charge controller with LCD display & 20Amp battery charger (AC Mode). 1 year warranty. IGBT product.
-
WEBCARDLX Network Card for Select UPS Systems and PDUs
The WEBCARDLX Network Card turns a compatible UPS system or PDU into a managed device on your network. By inserting WEBCARDLX into an accessory slot and using an SNMP network management platform, web browser, SSH or Telnet, you can monitor, control and reboot the device from almost anywhere at any time. Its HTML5-based interface means Java isn’t needed to interact with the mobile friendly Power Alert® Device Manager.
-
Tripplite Extension cable – 4-Outlet Power Strip with USB-A Charging
- 4 BS1363A outlets distribute power to appliances, tools, lighting and other electronics
- 1.8 m cord with BS1363A plug offers flexible placement in relation to an AC wall outlet
- 2 USB-A ports share 2.1A of power for charging phones, tablets and other mobile devices
- Rear keyhole slots enable mounting to desk or workbench for easy access to outlets
- 13A circuit breaker shuts down all UK outlets for safety in case of overload
-
Tripp Lite 3.7kW Single-Phase Switched PDU – LX Interface, 208/230V 24 Outlets
3.7kW vertical PDU distributes, monitors and manages single-phase power in an IT or industrial environment. Built-in network interface helps you remotely monitor load levels to prevent overloads that cause downtime.
- 3.3/3.7kW 208/230V switched PDU.
- 24 individually controllable outlets—20 C13, 4 C19.
- Pre-installed WEBCARDLX with latest version of PADM20 for IP-based Auto Probe feature.
- Digital ammeter for on-site load monitoring in real time.
- C20 inlet with 10ft NEMA L6-20P AC power cord.
- 2-year limited warranty.
-
Tripp Lite series 11.5kW 3-Phase Local Metered PDU, 208-240V (36 C13 & 9 C19)
- Local metered 11.5kW 3 Phase 360-415V input / 208-240V output PDU.
- Set of 3 digital meters reports output load level per phase in amps.
- 70in / 1778mm 0U vertical format, toolless button-mount installation.
- IEC-309 Red 16/20A (3P+N+E) 3 phase input; 6ft 1.8m line cord.
- 36 C13 and 9 C19 single phase outlets; Included cord retention brackets.
- 2-year limited warranty.
-
Tripp Lite series 7.7kW Single-Phase Switched Automatic Transfer Switch PDU
High-capacity 7.7kW 200-240V PDU with ATS provides remote power monitoring and enables redundant power for non-redundant hardware. LED display and LX Platform network interface enables remote outlet control and monitoring of site power status and PDU load levels.- Single-phase IEC309 200-240V 32A Blue (2P+E) input .
- 16 C13 and 2 C19 230V switched outlets in 2 breakered load banks.
- Automatic transfer switching within 1–5 ms.
- Ethernet network interface for remote access.
- Digital LED display for real-time status and current monitoring.
- 2-year limited warranty.
-
Tripplite series 7.7kW Single-Phase 200-240V Basic PDU, 10 C13 Outlets (PDUH32HV)
Delivers 200-240V single-phase AC power to multiple loads from a utility outlet, generator or UPS system in a high-density IT environment. Ideal for data centers, server rooms and network wiring closets.
- IEC 309 32A Blue (2P+E) input with 3.6 m power cord.
- 10 total C13 outlets—8 rear and 2 front.
- Switchless design prevents accidental shutdown.
- Reversible all-metal housing.
- Dual 20A circuit breakers protect against overloads.
- 2-year limited warranty.
-
Tripp-lite series 3.2-3.8kW Single-Phase Hot-Swap PDU,16A (PDUBHV20)
- Single phase 16A 200-240V Hot-swap PDU.
- Enables live replacement of a standard UPS with zero downtime.
- 2U horizontal rackmount installation.
- Compatible with any 200-240V UPS with a C20 input.
- Manual transfer switch controls PDU input power source.
- Pair of C20 compatible inputs connect to separate Utility and UPS inputs.
- 8 built in outlets (6 C13 / 2 C19).
- 2-year limited warranty
-
7.7kW Single-Phase Local Metered PDU, 200-240V 48 Outlets
Distributes 32A single-phase AC power to as many as 48 servers, routers, switches and other networking rack equipment. Features digital ammeters for real-time monitoring of load levels to prevent overloads.
- Ideal for server rooms, network closets and data centers.
- Dual load banks with 24 outlets each (4 C19 and 20 C13).
- Dedicated 20A circuit breakers protect output.
- IEC-309 32A blue input plug with 10-ft. (3.05 m) cord.
- Ready for immediate toolless 0U installation.
- 2-year limited warranty.
