Netstar NSW‑RPG071E‑V12‑OD2 (Web‑Smart Gigabit Reverse PoE Switch)
June 11, 2025
Netstar NS‑RP071F‑OD Reverse PoE Switch with Fiber Uplink
June 11, 2025
Netstar NSW‑RPG071E‑V12 Web‑Smart, Indoor Reverse‑PoE Gigabit Switch
- 7 × 10/100/1000 Mbps Reverse PoE Ports (RPoE in)
- 1 × Gigabit Uplink Port
- 12V DC Output for ONU/ONT
- Web Smart L2 Features (VLAN, QoS, Link Aggregation)
- Powered via 24–48V DC over Ethernet
- Auto-Negotiation & Jumbo Frame Support (9K)
- 2K MAC Address Table & 16 Gbps Switching Capacity
- Indoor-Optimized Design (160×95×28 mm, fanless)
Here are the detailed specifications of the Netstar NSW‑RPG071P‑V12 (also referenced as NSW‑RPG071E‑V12) — a Web‑Smart, Indoor Reverse‑PoE (RPoE) Gigabit Switch:
🔌 Ports & Power
- 7 × 10/100/1000 Mbps RJ‑45 Reverse‑PoE (RPoE PD) — Ethernet-powered (24–48 V DC on pins 4/5+, 7/8–)
- 1 × 10/100/1000 Mbps RJ‑45 Uplink Port
- 12 V DC Output via Barrel Jack — powers an ONU/ONT downstream
- RPoE Input Voltage: 24–48 V DC
- Max Transmission Distance: 100 m over Cat‑5e/6
🌐 Network & Management Features
- Web-based Layer 2 Management: VLAN (802.1Q), QoS (802.1p), Link Aggregation, Traffic Control
- Plug‑and‑Play functionality
- Supported Standards: IEEE 802.3/3u/3ab, 802.3x, 802.1Q, 802.1p
- Flow Control: IEEE 802.3x for full duplex
📊 Performance & Memory
- Switching Capacity: 16 Gbps
- MAC Address Table: 2K dynamic entries
- Jumbo Frame Support: Up to 9K bytes
- Power Consumption: < 5 W (excluding DC output load)
- MTBF: ≥ 50,000 hours
🧰 Mechanical & Environmental
- Dimensions: 160 × 95 × 28 mm
- Weight: ~450 g
- Operating Temperature: –20 °C to +55 °C
- Humidity Range: 10 %–90 % RH (non‑condensing)
✅ Ideal Use Cases
- FTTH/FTTB Corridors & Multi‑Dwelling Units — ideal where AC power is not available
- Indoor CPE Zones — reduces cabling and power hassle
- Small Office Environments
- ISP ONU/RPoE Deployments — efficient power/data delivery over Ethernet
🔍 Quick Summary
| Attribute | Specification |
|---|---|
| Ports | 7 × Gigabit RPoE PD + 1 × Gigabit Uplink |
| PoE Input | Reverse PoE 24–48 V DC |
| PoE Output | 12 V DC barrel jack |
| Switching Capacity | 16 Gbps, 2K MAC, 9K jumbo frames |
| Management | Web‑L2: VLAN, QoS, LAG |
| Consumption | < 5 W (excl. load) |
| MTBF | ≥ 50,000 hrs |
| Temp & Humidity | –20 °C to +55 °C, 10–90 % RH |
| Form Factor | 160×95×28 mm, 450 g |
| Brand | Netstar |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
Starlink Enterprise Kit
The Starlink Enterprise Kit is tailored for business applications, offering enhanced performance and reliability. Below are its key specifications:
- Type: Electronic Phased Array
- Field of View: 110°
- Orientation: Software-assisted manual positioning
- Dimensions: 594 mm x 383 mm x 39.7 mm (23.4 in x 15.07 in x 1.5 in)
- Weight: 2.9 kg (6.4 lbs); 3.2 kg (7 lbs) with kickstand
- Environmental Rating: IP67 (dust and water-resistant)
- Wind Resistance: Operational up to 96 kph (60 mph)
- Power Consumption: Average 75–100 W
-
STARLINK STANDARD KIT
The Starlink Standard Kit provides satellite-based high-speed, low-latency internet, making it ideal for remote and rural areas. Below are the key specifications:
- Connect up to 235 devices
- WiFi 6
- Tri Band 4 x 4 MU-MIMO
-
HPE Aruba Networking CX 6000 24G Class4 PoE 4SFP 370W Switch
- Total Ports: 24 x Gigabit Ethernet (10/100/1000 Mbps) PoE+ ports
- PoE Power Budget: 370W (Supports IEEE 802.3at PoE+, up to 30W per port)
- Uplink Ports: 4 x SFP (1GbE) slots for fiber connectivity
- Switching Capacity: 56 Gbps
- Forwarding Rate: 41.7 Mpps (Million packets per second)
-
UniFi Express (UX)
- All-in-one WiFi 6 router + access point
- Dual-band 2×2 WiFi 6 (up to 2.4 Gbps)
- 2× Gigabit ports (1 WAN, 1 LAN)
- Compact, fanless design (USB-C powered)
- Runs UniFi Network app
- Supports VPN (Teleport, WireGuard, IPsec, etc.)
- Firewall, VLANs, content filtering
- 0.96″ status display
- Easy setup via Bluetooth or Ethernet
Reviews
There are no reviews yet.