Netstar NS‑ER7‑E1‑V12‑OD2 Unmanaged Remote Powered Switch
June 11, 2025
Netstar NSW‑RPG071E‑V12 Web‑Smart, Indoor Reverse‑PoE Gigabit Switch
June 11, 2025
Netstar NSW‑RPG071E‑V12‑OD2 (Web‑Smart Gigabit Reverse PoE Switch)
- 7 × Gigabit Reverse PoE Ports (RPoE in)
- 1 × Gigabit Uplink Port
- 12V DC Output for powering ONU/ONT
- Web Smart L2 Management (VLAN, QoS, LAG, Port Isolation)
- Powered via 24–48V DC over Ethernet (no AC required)
- Port-based Isolation & Auto-Negotiation
- Surge, Over-Voltage & Over-Current Protection
- Outdoor-Ready Design (–20 °C to +80 °C)
Here are the detailed specifications for the Netstar NSW‑RPG071E‑V12‑OD2 — a Web Smart Outdoor Gigabit Reverse PoE Switch:
🔌 Ports & Power
| Feature | Specification |
|---|---|
| Downlink Ports | 7 × 10/100/1000 Mbps Reverse PoE RJ45 (RPoE in) |
| Uplink Port | 1 × 10/100/1000 Mbps RJ45 |
| Power Input | Reverse PoE, 24–48 V DC via Ethernet (pins 4/5+, 7/8–) |
| Power Output | 12 V DC via 2.1 mm jack – for ONU/ONT powering |
| Power Budget | ~120 W max (PoE in dependent) |
🌐 Network Features
- Web Smart Management (L2):
- VLAN support (Port-based, IEEE 802.1Q)
- QoS
- Port Isolation
- Link Aggregation (LAG)
- Bandwidth Control
- Port Mirroring
- Auto-Negotiation: Supports 10/100/1000 Mbps (half/full duplex)
- Flow Control: IEEE 802.3x full duplex & backpressure half duplex
- MAC Table: 1K entries
- Packet Buffer Memory: 448 Kbits
- Switching Capacity: Up to 16 Gbps
- Forwarding Rate: 11.9 Mpps
⚡ Electrical & Protection Features
- Reverse PoE Input: One port supplies power to the switch and output (no AC required)
- Port Protection:
- Surge Protection: 2.5 kV on all ports
- Over-voltage Protection: Switch shuts down above 50 V DC
- Over-current Protection: Each port fuse auto-recovers
- Grounding Terminal: For lightning protection grounding
📦 Mechanical & Environmental
| Attribute | Value |
|---|---|
| Casing | Rugged outdoor-grade metal/plastic (IP-rated for weather resistance) |
| Dimensions | ~160 mm (W) × 95 mm (D) × 28 mm (H) |
| Weight | ~150–200 grams |
| Operating Temp | –20 °C to +80 °C |
| Storage Temp | –30 °C to +90 °C |
| Humidity | 5% to 95% RH (non-condensing) |
🏗️ Installation & Use Cases
- Mounting Options: Pole or wall mounting compatible (outdoor kit needed)
- Use Case: Designed for WISP/ISP last-mile deployments, powering ONUs remotely without local power
- Cascading: Supports daisy-chaining switches for extended coverage
✅ Ideal For:
- Outdoor FTTH ONU deployments
- Shared fiber-to-building with gigabit output
- Scenarios where power is only available at the subscriber side
- ISPs looking to reduce CPE power infrastructure costs
| Brand | Netstar |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
STARLINK STANDARD KIT
The Starlink Standard Kit provides satellite-based high-speed, low-latency internet, making it ideal for remote and rural areas. Below are the key specifications:
- Connect up to 235 devices
- WiFi 6
- Tri Band 4 x 4 MU-MIMO
-
Starlink Standard Actuated Kit
The Starlink Standard Actuated Kit is designed to provide high-speed, low-latency satellite internet, featuring a motorized antenna for self-orientation. Below are its key specifications:
- Type: Electronic Phased Array with motorized self-orientation
- Dimensions: 303 mm (L) x 513 mm (D)
- Weight: 2.9 kg (6.4 lbs) without cable; 3.6 kg (7.9 lbs) with 15.2 m (50 ft) cable
- Weather Resistance: IP54-rated for dust and water resistance
- Operating Temperature: -30ºC to 55ºC (-22°F to 131°F)
- Connect up to 185 devices
- WiFi 5
- Dual Band – 3 x 3 MIMO
-
UniFi U6 Mesh Pro (U6-Mesh-Pro)
- Wi-Fi 6 (802.11ax) support
- Dual-band: 2.4 GHz: up to 573.5 Mbps (2×2 MIMO), 5 GHz: up to 4800 Mbps (4×4 MIMO, 160 MHz)
- Max throughput: ~5.3 Gbps
- Gigabit Ethernet port (802.3af PoE input)
- Weather-resistant (IPX5) – indoor/outdoor use
- PoE powered (802.3af PoE)
- Managed via UniFi Network Controller
- Compact design – suitable for ceiling, wall, or pole mounting
-
UniFi Dream Machine Pro (UDM-Pro)
- All-in-one 1U rackmount gateway with firewall, router, switch, NVR, and UniFi OS support
- Dual WAN (1x 1G RJ45, 1x 10G SFP+) with failover and load balancing
- 8x 1G LAN + 1x 10G SFP+ LAN ports
- Quad-core 1.7 GHz CPU, 4 GB RAM, 16 GB storage
- IDS/IPS throughput up to 3.5 Gbps, Deep Packet Inspection, and advanced firewall
- Supports UniFi SD-WAN, VPN (IPsec, WireGuard, OpenVPN, Teleport), and policy-based routing
- Built-in 3.5″ HDD bay for UniFi Protect (NVR)
- Runs UniFi Network, Protect, Access, Talk, and Connect apps
- Redundant power ready via UniFi SmartPower (USP-RPS)
Reviews
There are no reviews yet.