
MikroTik RBwAPG-60adkit (Wireless Wire Kit)
July 18, 2025
MikroTik CubeG-5ac60ay (Cube 60Pro ac)
July 18, 2025MikroTik CubeG-5ac60ay-SA (CubeSA 60Pro ac)
- Sector coverage for 60 GHz PtMP deployment (up to 8–10 clients)
- High-throughput 60 GHz connectivity with low interference
- Automatic failover to 5 GHz ensures always-on connectivity
- Pre-installed RouterOS with advanced routing and management features
- Integrated GPS for time and frequency synchronization
- Excellent thermal and mechanical stability with passive cooling
- Compact, durable, and visually discreet design
The MikroTik CubeG-5ac60ay-SA, also known as the CubeSA 60Pro ac, is a powerful 60 GHz sector access point designed for short-range, high-speed point-to-multipoint (PtMP) communication. With support for the 802.11ay standard and integrated 5 GHz backup, it ensures robust connectivity even in challenging weather conditions. The device is ideal for urban broadband distribution, smart city applications, and dense campus setups.
General Specifications
- Product Code: CubeG-5ac60ay-SA
- CPU: IPQ-4019 (Quad-core ARM Cortex-A7)
- CPU Frequency: Auto-scaled, nominal 716 MHz
- Architecture: ARM 32-bit
- RAM: 256 MB
- Storage: 64 MB NAND Flash
- RouterOS License Level: 4
- Operating System: RouterOS (pre-installed)
- MTBF: Approximately 200,000 hours at 25°C
- Dimensions: 115 x 211 x 90 mm
- Operating Temperature: -40°C to +70°C
- Ingress Protection: IP54 (dust and splash resistant)
Wireless Capabilities
- 60 GHz Wireless Standard: 802.11ay (backward compatible with 802.11ad)
- 60 GHz Antenna Gain: Integrated, with sector coverage (~60° beamwidth)
- Maximum 60 GHz EIRP: Up to 40 dBm
- 5 GHz Wireless Standard: 802.11a/n/ac
- 5 GHz Antenna Gain: 11.5 dBi
- 5 GHz Beamwidth: 35° (for failover)
- Wireless Chipsets:
- 60 GHz: QCA6438
- 5 GHz: IPQ4019
- Redundancy: Automatic fallback from 60 GHz to 5 GHz during signal loss or interference
Networking & Ports
- Ethernet Port: 1 x 10/100/1000 Mbps (Gigabit Ethernet)
- Supported Protocols: IPv4, IPv6, VLAN, MPLS, OSPF, BGP, VPN, Firewall, DHCP, DNS
- GPS Module: MT3337V (for precise synchronization in multi-sector deployments)
Power
- Power Input:
- PoE-in: 802.3af/at compliant
- Voltage Range: 18 V to 48 V
- Power Consumption: Maximum 13 W
- Cooling: Passive (fanless)
Mounting & Physical
- Mounting Options: Pole and wall mounting hardware included
- Design: Weather-resistant outdoor enclosure with reinforced base
- Color: White enclosure with integrated heat sink
Ideal Use Cases
- High-speed urban wireless access in clean 60 GHz spectrum
- Smart city deployments and IoT gateway clusters
- Multi-client video surveillance backhaul
- Campus or event broadband distribution
- WISP sector base station with gigabit speeds
Meta Description:
MikroTik CubeG-5ac60ay-SA is a 60 GHz + 5 GHz sector access point with 60° coverage, GPS sync, automatic 5 GHz failover, and IP54 rating—ideal for high-speed point-to-multipoint wireless deployments in dense or interference-prone environments.
| Brand | MikroTik |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
Starlink Flat High Performance Kit
The Starlink Flat High Performance Kit is designed to provide enhanced satellite connectivity, especially for mobile users and environments requiring a wider field of view. Below are its key specifications:
- Type: Electronic Phased Array
- Field of View: 140°, allowing it to see 35% more sky and connect to more satellites
- Dimensions: 575 mm x 511 mm x 41 mm (22.6 in x 20.1 in x 1.6 in)
- Weight: 5.9 kg (13 lbs) without cable
- Environmental Rating: IP56 (dust and water-resistant)
- Wind Resistance: Survivable up to 174 mph
- Wi-Fi Technology: 802.11 a/b/g/n/ac/ax (Wi-Fi 6)
- Radio: Tri-Band 4×4 MU-MIMO
- Ethernet Ports: Two latching LAN ports with removable cover
- Coverage: Up to 297 m² (3,200 ft²)
- Weight: 0.57 kg (1.25 lbs)
-
UniFi Dream Machine Pro Max (UDM-Pro-Max)
The UniFi Dream Machine Pro Max (UDM-Pro-Max) is a high-performance, 1U rackmount UniFi Cloud Gateway featuring a 2.0 GHz quad-core CPU, 8 GB RAM, 32 GB eMMC, 128 GB SSD, and dual 3.5″ HDD bays with RAID support. It offers dual WAN (2.5GbE & 10G SFP+), 8x 1G LAN, 10G SFP+ LAN, and 5 Gbps IDS/IPS throughput. Designed for large-scale UniFi deployments, it runs all UniFi OS apps (Network, Protect, Access, Talk, Connect), supports RAID, SD-WAN, VPN, QoS, and up to 2,000+ clients—ideal for advanced enterprise networks.
-
Starlink Enterprise Kit
The Starlink Enterprise Kit is tailored for business applications, offering enhanced performance and reliability. Below are its key specifications:
- Type: Electronic Phased Array
- Field of View: 110°
- Orientation: Software-assisted manual positioning
- Dimensions: 594 mm x 383 mm x 39.7 mm (23.4 in x 15.07 in x 1.5 in)
- Weight: 2.9 kg (6.4 lbs); 3.2 kg (7 lbs) with kickstand
- Environmental Rating: IP67 (dust and water-resistant)
- Wind Resistance: Operational up to 96 kph (60 mph)
- Power Consumption: Average 75–100 W
-
UniFi U6 In-Wall (U6-IW)
- Wi-Fi 6 (802.11ax) access point
- Dual-band: 2.4 GHz: up to 573.5 Mbps (2×2 MIMO), 5 GHz: up to 4.8 Gbps (4×4 MU-MIMO with 160 MHz)
- 4 Gigabit LAN ports: 1x PoE In (802.3at), 1x PoE Out (802.3af), 3x data-only ports
- Wall-mount design — replaces standard Ethernet wall plates
- Managed via UniFi Network Controller
- Ideal for rooms needing Wi-Fi + Ethernet
- PoE powered (802.3at required for full features)















Reviews
There are no reviews yet.