
MikroTik RBwAPG-60ad-A (wAP 60G AP)
July 18, 2025
MikroTik RBLHGG-60ad (LHG 60G)
July 18, 2025MikroTik RBwAPG-60ad (wAP 60G)
- High-Speed 60 GHz PtP Wireless Link – Fiber-speed performance without the cable
- Low Interference Band – Operates in the uncongested 60 GHz frequency
- Integrated 23 dBi Directional Antenna – Stable, focused wireless link
- Gigabit Ethernet Port – Seamless backhaul or LAN integration
- Passive and Active PoE Support – Flexible powering options
- Weatherproof Enclosure – IP54-rated for harsh environments
- Lightweight & Compact – Ideal for discreet installations
- RouterOS Level 3 License – Perfect for CPE or point-to-point setup
The MikroTik RBwAPG-60ad (wAP 60G) unit differs slightly from the RBwAPG-60ad-A (AP model) as it is typically used for point-to-point (PtP) applications rather than point-to-multipoint (PtMP).
The MikroTik RBwAPG-60ad (wAP 60G) is a compact and weather-resistant 60 GHz CPE or point-to-point wireless unit designed for ultra-fast short-range links. Ideal as a fiber alternative, it provides Gigabit-speed connectivity in environments with minimal interference. Featuring an integrated high-gain antenna and robust RouterOS firmware, it’s perfect for wirelessly bridging buildings or connecting devices in dense urban setups.
General Specifications
- Product Code: RBwAPG-60ad
- Architecture: ARM 32bit
- CPU: IPQ-4019 (Quad-core)
- CPU Frequency: 716 MHz
- RAM Size: 256 MB
- Storage: 16 MB Flash
- RouterOS License: Level 3 (suitable for CPE or PtP roles)
- Operating System: RouterOS
- Dimensions: 185 x 85 x 30 mm
- Enclosure Rating: IP54 (weatherproof)
- MTBF: ~200,000 hours at 25°C
- Operating Temperature Range: -40°C to +70°C
Wireless Specifications
- Wireless Protocol: 60 GHz 802.11ad
- Max Data Rate: Up to 1 Gbps
- Wireless Chipset: QCA6335
- Beamwidth: 60° horizontal, 13° vertical
- Integrated Antenna Gain: 23 dBi
- Wireless Output Power: Up to 40 dBm EIRP
- Connection Mode: Point-to-point or client (CPE)
- Encryption Support: WPA2 with AES
Interfaces & Connectivity
- Ethernet: 1 x 10/100/1000 Mbps Gigabit Ethernet
- PoE Input: 802.3af/at and Passive PoE supported
- Supported Input Voltage: 12–57 V
- Max Power Consumption: 5 W
- Connector Type: Shielded RJ45
- Reset Button: Yes
- LED Indicators: Signal strength and status
Mounting & Design
- Mounting Kit Included: Wall and pole mount accessories
- Compact & Sleek Housing: Blends into urban or residential environments
- Cooling: Passive (fanless)
Ideal Use Cases
- Point-to-point wireless bridge (up to 200 meters with clear line of sight)
- Wireless connection between buildings
- Replacing short fiber runs
- CPE unit for MikroTik’s 60 GHz AP systems
Meta Description:
MikroTik RBwAPG-60ad (wAP 60G) is a compact, weatherproof 60 GHz wireless device for ultra-fast point-to-point links, featuring a 23 dBi antenna, Gigabit Ethernet, and RouterOS Level 3 license – ideal for short-range, high-speed wireless bridging.
| Brand | MikroTik |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
Ruijie RG-AP9861-R Access Point
- Wi-Fi 7 (802.11be) with up to 24.436 Gbps total throughput
- 18 spatial streams across 5 radios (including a dedicated AI radio)
- Tri-band support: 2.4 GHz, 5 GHz, and 6 GHz
- Built-in AI Radio for real-time network scanning and optimization
- 4096-QAM & 320 MHz channel width for ultra-fast speeds
- Smart Antennas for beamforming and enhanced coverage
- 10GE uplink port (SFP+/RJ45 combo)
- PoE++ (802.3bt) and DC power options
-
STARLINK STANDARD KIT
The Starlink Standard Kit provides satellite-based high-speed, low-latency internet, making it ideal for remote and rural areas. Below are the key specifications:
- Connect up to 235 devices
- WiFi 6
- Tri Band 4 x 4 MU-MIMO
-
HPE Aruba Networking CX 6000 24G Class4 PoE 4SFP 370W Switch
- Total Ports: 24 x Gigabit Ethernet (10/100/1000 Mbps) PoE+ ports
- PoE Power Budget: 370W (Supports IEEE 802.3at PoE+, up to 30W per port)
- Uplink Ports: 4 x SFP (1GbE) slots for fiber connectivity
- Switching Capacity: 56 Gbps
- Forwarding Rate: 41.7 Mpps (Million packets per second)
-
Starlink Flat High Performance Kit
The Starlink Flat High Performance Kit is designed to provide enhanced satellite connectivity, especially for mobile users and environments requiring a wider field of view. Below are its key specifications:
- Type: Electronic Phased Array
- Field of View: 140°, allowing it to see 35% more sky and connect to more satellites
- Dimensions: 575 mm x 511 mm x 41 mm (22.6 in x 20.1 in x 1.6 in)
- Weight: 5.9 kg (13 lbs) without cable
- Environmental Rating: IP56 (dust and water-resistant)
- Wind Resistance: Survivable up to 174 mph
- Wi-Fi Technology: 802.11 a/b/g/n/ac/ax (Wi-Fi 6)
- Radio: Tri-Band 4×4 MU-MIMO
- Ethernet Ports: Two latching LAN ports with removable cover
- Coverage: Up to 297 m² (3,200 ft²)
- Weight: 0.57 kg (1.25 lbs)
















Reviews
There are no reviews yet.