
D-Link 18-Port Gigabit Smart Managed PoE+ Switch (DGS-F1210-18PS-E)
May 28, 2025
D-Link 26-Port Gigabit Smart Managed PoE+ Switch (DGS-F1210-26PS-E)
May 28, 2025D-Link 26-Port Gigabit PoE + 2 SFP Switch (DGS-F1026P-E)
- 24 10/100/1000 Mbps gigabit ethernet ports
- 2 SFP port
- 250watts available PoE
- Flow control for protection against loss data
- Maximum distance of 250m
- Light protection (6kV)
- Operating Temperature: 0 to 40 deg C (32 to 104 deg F)
The DGS-F1026P-E is a Plug-and-Play device that requires no configuration, so setup is simple and hassle-free, and you can easily connect multiple computers, share files, music, and video across your home or small office network, or even create a multiplayer gaming environment. 802.3x flow control on each port minimizes dropped packets when the port’s receiving buffer is full, giving you a more reliable connection for all of your connected devices.
Here’s a detailed overview of the D-Link DGS-F1026P-E 24-Port Gigabit PoE+ Switch with 2 SFP Uplink Ports:
📘 D-Link DGS-F1026P-E – 24-Port Gigabit PoE+ Switch with 2 SFP Uplinks
🔌 Hardware Overview
- Ports:
- 24 × 10/100/1000 Mbps PoE+ RJ45 ports
- 2 × Gigabit SFP uplink ports
- Switching Capacity: 52 Gbps
- Forwarding Rate: 38.69 Mpps
- MAC Address Table: 8K entries
- PoE Standards: IEEE 802.3af/at
- PoE Budget: Up to 250W total, 30W max per port
- Extended PoE Range: Up to 250 meters on ports 1–8 with Extend mode enabled
- Lightning Protection: 6kV surge protection
⚙️ Software & Management Features
- Operating Modes (via DIP switch):
- Extend Mode: Enables 250m PoE transmission on ports 1–8
- VLAN Mode: Isolates ports 1–24 to prevent broadcast storms
- QoS Mode: Prioritizes video data for smoother transmission
- PoE Reset Mode: Allows remote rebooting of PoE devices
- Plug & Play Installation: No configuration required
- Flow Control: IEEE 802.3x for reliable data transmission
🌿 Energy Efficiency
- Energy-Efficient Ethernet (EEE): Compliant with IEEE 802.3az
- Power Saving Features:
- Link status detection
- Port shut-off
📏 Physical & Environmental Specifications
- Dimensions: 440 × 180 × 44 mm
- Weight: 3.0 kg
- Operating Temperature: 0°C to 40°C
- Storage Temperature: -20°C to 70°C
- Operating Humidity: 0% to 95% RH (non-condensing)
- Storage Humidity: 0% to 95% RH
- Power Input: 100-240 VAC, 50-60 Hz
- Maximum Power Consumption: 250W
📦 Package Contents
- DGS-F1026P-E Switch
- Power Cord
- Rack Mount Kit
- User Manual
| Brand | Dlink |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
UniFi U6 Mesh (U6-Mesh)
- Wi-Fi 6 (802.11ax) dual-band AP
- 2.4 GHz: up to 573.5 Mbps (2×2 MIMO)
- 5 GHz: up to 2402 Mbps (2×2 MU-MIMO with 160 MHz support)
- Total throughput: ~3 Gbps
- Compact, sleek design for flexible indoor or outdoor use
- Weather-resistant (IPX5) – suitable for sheltered outdoor environments
- 1x Gigabit Ethernet port (802.3af PoE input)
- Mesh-capable – great for wireless uplinks in UniFi networks
- Mounting options included (pole, wall, ceiling)
-
Ruijie RG-AP9861-R Access Point
- Wi-Fi 7 (802.11be) with up to 24.436 Gbps total throughput
- 18 spatial streams across 5 radios (including a dedicated AI radio)
- Tri-band support: 2.4 GHz, 5 GHz, and 6 GHz
- Built-in AI Radio for real-time network scanning and optimization
- 4096-QAM & 320 MHz channel width for ultra-fast speeds
- Smart Antennas for beamforming and enhanced coverage
- 10GE uplink port (SFP+/RJ45 combo)
- PoE++ (802.3bt) and DC power options
-
Starlink Standard Actuated Kit
The Starlink Standard Actuated Kit is designed to provide high-speed, low-latency satellite internet, featuring a motorized antenna for self-orientation. Below are its key specifications:
- Type: Electronic Phased Array with motorized self-orientation
- Dimensions: 303 mm (L) x 513 mm (D)
- Weight: 2.9 kg (6.4 lbs) without cable; 3.6 kg (7.9 lbs) with 15.2 m (50 ft) cable
- Weather Resistance: IP54-rated for dust and water resistance
- Operating Temperature: -30ºC to 55ºC (-22°F to 131°F)
- Connect up to 185 devices
- WiFi 5
- Dual Band – 3 x 3 MIMO
-
UniFi U6 Enterprise In-Wall (U6-Enterprise-IW)
- WiFi 6E tri-band (2.4 GHz, 5 GHz, 6 GHz)
- Up to 10.2 Gbps aggregate throughput
- 4×4 MU-MIMO on 5 GHz & 6 GHz
- 1 × 2.5 GbE uplink port + 4 × GbE downlink ports (1 PoE output)
- PoE+ or PoE++ powered
- Wall-mounted with compact design
- Coverage: up to 115 m² (1,250 ft²)
- Supports 600+ clients
- Advanced roaming & mesh support
- Captive portal & WiFi scheduling















Reviews
There are no reviews yet.