
UniFi Device Bridge Pro (UDB-Pro)
January 3, 2026
UniFi Gateway Fiber (UXG-Fiber)
January 3, 2026UniFi Device Bridge Pro Sector (UDB-Pro-Sector)
- Directional sector-based wireless client bridge
- Dual-band Wi-Fi connectivity
- High-gain antenna for long-range stability
- Gigabit Ethernet output
- Fully managed via UniFi Network Application
The UniFi Device Bridge Pro Sector (UDB-Pro-Sector) is an enterprise-grade wireless client bridge engineered for long-range, directional Wi-Fi connectivity to reliably connect Ethernet-based devices where cabling is impractical. Designed with a sectorized antenna pattern, the UniFi Device Bridge Pro Sector is ideal for campuses, industrial sites, yards, and outdoor deployments requiring stable, low-latency wireless backhaul for critical devices.
Product Overview
The UniFi Device Bridge Pro Sector operates as a dedicated Wi-Fi station that securely associates with UniFi access points and delivers network connectivity through its Ethernet interface. The sector antenna design provides controlled coverage over a defined area, improving signal quality, reducing interference, and enabling consistent performance for multiple remote device placements within the sector.
Wireless Standards & Performance
- Wireless standard: IEEE 802.11ac (Wi-Fi 5)
- Frequency bands:
- 2.4 GHz
- 5 GHz
- Optimized for long-range wireless client bridge operation
- Low-latency and stable wireless-to-Ethernet performance
Antenna & RF Design
- Integrated high-gain sector antenna
- Directional coverage for focused RF distribution
- Reduced interference and improved link stability
- Optimized for outdoor and extended-range deployments
Ethernet & Networking
- 1 × Gigabit Ethernet port
- Transparent Layer 2 bridge functionality
- Supports VLAN tagging and enterprise network segmentation
Power & Installation
- Power method: Power over Ethernet (PoE)
- Single Ethernet cable for power and data
- Wall and pole mounting support
- Designed for rapid outdoor deployment
Management & Security
- Managed through UniFi Network Application
- Centralized provisioning, monitoring, and firmware updates
- Enterprise-grade wireless security with WPA2 and WPA3 support
- Detailed visibility into link quality and performance
Physical & Environmental Design
- Outdoor-capable, weather-resistant enclosure
- Engineered for continuous 24/7 operation
- Suitable for industrial, campus, and enterprise environments
Typical Use Cases
- Wireless backhaul for cameras and access control devices
- Connecting remote Ethernet devices across open areas
- Industrial yards, parking facilities, and campus extensions
Key Features
- Directional sector-based wireless client bridge
- Dual-band Wi-Fi connectivity
- High-gain antenna for long-range stability
- Gigabit Ethernet output
- Fully managed via UniFi Network Application
Meta Description
UniFi Device Bridge Pro Sector (UDB-Pro-Sector) is a directional wireless client bridge with a sector antenna, delivering reliable long-range, PoE-powered Ethernet connectivity over Wi-Fi for enterprise and outdoor deployments.
| Brand | Ubiquiti |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
UniFi U6 + (U6-Plus)
- Wi-Fi 6 (802.11ax) support
- Dual-band: 2.4 GHz (573.5 Mbps) & 5 GHz (2402 Mbps)
- 2×2 MIMO on both bands
- 1x GbE RJ45 port (802.3af PoE)
- Compact indoor design
- Ceiling/wall mountable
- Managed via UniFi Network Controller
- Up to ~3 Gbps aggregate throughput
-
UniFi U6 In-Wall (U6-IW)
- Wi-Fi 6 (802.11ax) access point
- Dual-band: 2.4 GHz: up to 573.5 Mbps (2×2 MIMO), 5 GHz: up to 4.8 Gbps (4×4 MU-MIMO with 160 MHz)
- 4 Gigabit LAN ports: 1x PoE In (802.3at), 1x PoE Out (802.3af), 3x data-only ports
- Wall-mount design — replaces standard Ethernet wall plates
- Managed via UniFi Network Controller
- Ideal for rooms needing Wi-Fi + Ethernet
- PoE powered (802.3at required for full features)
-
HPE Aruba Networking CX 6000 24G Class4 PoE 4SFP 370W Switch
- Total Ports: 24 x Gigabit Ethernet (10/100/1000 Mbps) PoE+ ports
- PoE Power Budget: 370W (Supports IEEE 802.3at PoE+, up to 30W per port)
- Uplink Ports: 4 x SFP (1GbE) slots for fiber connectivity
- Switching Capacity: 56 Gbps
- Forwarding Rate: 41.7 Mpps (Million packets per second)
-
UniFi U6 Mesh Pro (U6-Mesh-Pro)
- Wi-Fi 6 (802.11ax) support
- Dual-band: 2.4 GHz: up to 573.5 Mbps (2×2 MIMO), 5 GHz: up to 4800 Mbps (4×4 MIMO, 160 MHz)
- Max throughput: ~5.3 Gbps
- Gigabit Ethernet port (802.3af PoE input)
- Weather-resistant (IPX5) – indoor/outdoor use
- PoE powered (802.3af PoE)
- Managed via UniFi Network Controller
- Compact design – suitable for ceiling, wall, or pole mounting
















Reviews
There are no reviews yet.