
TP-Link JetStream 10-Port Gigabit Smart Switch 8-Port PoE+
July 24, 2025
TP-Link JetStream 28-Port Gigabit Smart Switch 24-Port PoE+
July 24, 2025TP-Link 18-Port Gigabit Easy Smart Switch 16-Port PoE+
- 16 PoE+ Gigabit ports with 250W total budget
- 2 non-PoE uplink ports for high-speed data transfer
- Extend Mode: up to 250m transmission for long-range PoE
- VLAN, IGMP Snooping, and QoS support for traffic management
- Auto-recovery for frozen PoE devices
- Desktop or rackmount ready with metal chassis
The TP-Link 18-Port Gigabit Easy Smart Switch 16-Port PoE+( TL-SG1218MPE ) is a high-performance 18-port Gigabit Easy Smart Switch designed for SMBs needing advanced PoE capabilities. With 16 PoE+ ports, it delivers up to 30W per port and a total PoE budget of 250W, supporting high-demand devices such as IP cameras, VoIP phones, and wireless access points.
This switch is part of TP-Link’s Easy Smart line, offering Layer 2 management features like VLAN, QoS, and IGMP Snooping through a user-friendly web interface. It’s ideal for expanding wired networks while powering connected devices efficiently.
🔧 Hardware Specifications
- Total Ports: 18
- 16 × Gigabit RJ45 PoE+ ports (10/100/1000 Mbps, IEEE 802.3af/at compliant)
- 2 × Gigabit RJ45 uplink ports (non-PoE)
- Switching Capacity: 36 Gbps
- Packet Forwarding Rate: 26.78 Mpps
- PoE Budget: Up to 250W total
- Up to 30W per port (IEEE 802.3at)
- MAC Address Table: 8K entries
- Packet Buffer Memory: 4.1 Mb
- Jumbo Frame Support: 9 KB
- Fan Quantity: 2
- Enclosure Type: Metal
- Mounting: Desktop or 19″ Rack-mountable
- LED Indicators: Per port: Link/Act/PoE Status, Per unit: Power
- Dimensions: 440 × 180 × 44 mm
- Weight: Approx. 2.5 kg
⚡ PoE Features
- Standards: IEEE 802.3af / IEEE 802.3at
- PoE Auto-Recovery: Automatically reboots unresponsive PoE devices
- PoE Power Scheduling: Schedule specific times to power PoE ports
- Port Priority Function: Ensures critical devices maintain power
- Isolation Mode: Separates PoE port groups for enhanced security
- PoE Extend Mode: Up to 250 meters transmission on ports 1–8 at 10 Mbps
🌐 Software Features
- Management:
- Web-based GUI
- Easy Smart Configuration Utility
- L2 Switching Features:
- 802.1Q VLAN (up to 32 VLANs)
- Port-based VLAN
- MTU VLAN
- Link Aggregation (Static)
- IGMP Snooping v1/v2/v3
- Port Mirroring
- Loop Prevention
- Cable Diagnostics
- QoS (Quality of Service):
- 802.1p CoS / DSCP prioritization
- 4 priority queues
- Flow Control:
- IEEE 802.3x full-duplex
- Back-pressure for half-duplex
- Storm Control:
- Broadcast / Multicast / Unknown unicast control
🔒 Security
- Access Control: VLAN segregation
- Broadcast Storm Control: Protects against bandwidth flooding
- Device Management Security: Password protection and web management access control
🔌 Power & Environment
- Power Supply: 100–240V AC, 50/60Hz internal PSU
- Max Power Consumption: 263.55W (with PoE), 16.54W (without PoE)
- Heat Dissipation: 899.58 BTU/hr
- Operating Temperature: 0–50 °C
- Storage Temperature: -40–70 °C
- Operating Humidity: 10–90% RH, non-condensing
- Storage Humidity: 5–90% RH, non-condensing
📝 Meta Description
The TP-Link 18-Port Gigabit Easy Smart Switch 16-Port PoE+ is an 18-port Gigabit Easy Smart PoE+ switch featuring 16 PoE+ ports with a 250W budget, Layer 2 management, VLAN, QoS, and auto-recovery—ideal for surveillance, VoIP, and business networks.
| Brand | Dlink |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
UniFi U6 In-Wall (U6-IW)
- Wi-Fi 6 (802.11ax) access point
- Dual-band: 2.4 GHz: up to 573.5 Mbps (2×2 MIMO), 5 GHz: up to 4.8 Gbps (4×4 MU-MIMO with 160 MHz)
- 4 Gigabit LAN ports: 1x PoE In (802.3at), 1x PoE Out (802.3af), 3x data-only ports
- Wall-mount design — replaces standard Ethernet wall plates
- Managed via UniFi Network Controller
- Ideal for rooms needing Wi-Fi + Ethernet
- PoE powered (802.3at required for full features)
-
Starlink Standard Actuated Kit
The Starlink Standard Actuated Kit is designed to provide high-speed, low-latency satellite internet, featuring a motorized antenna for self-orientation. Below are its key specifications:
- Type: Electronic Phased Array with motorized self-orientation
- Dimensions: 303 mm (L) x 513 mm (D)
- Weight: 2.9 kg (6.4 lbs) without cable; 3.6 kg (7.9 lbs) with 15.2 m (50 ft) cable
- Weather Resistance: IP54-rated for dust and water resistance
- Operating Temperature: -30ºC to 55ºC (-22°F to 131°F)
- Connect up to 185 devices
- WiFi 5
- Dual Band – 3 x 3 MIMO
-
UniFi Cloud Gateway Max (UCG-Max)
- 2.5 Gbps Throughput: High-speed data transfer with up to 2.5 Gbps throughput.
- Multi-WAN Support: Handles multiple WAN connections for load balancing and failover.
- Advanced Routing: Supports OSPF, BGP, static routing, and VPN configurations.
- Security: Built-in firewall, VPN support, IDS/IPS, and DDoS protection.
- UniFi Integration: Seamless integration with the UniFi Network Controller and Cloud management.
- 512GB SSD: Pre-installed for fast storage and system performance.
- 4 x 2.5GbE Ports: For high-speed local network connections.
- IPv6 Support: Fully compatible with IPv6 for modern networks.
- Rackmountable: 1U form factor for easy installation in server racks.
- Zero-Touch Provisioning: Easy device deployment and configuration.
-
UniFi U6 Mesh Pro (U6-Mesh-Pro)
- Wi-Fi 6 (802.11ax) support
- Dual-band: 2.4 GHz: up to 573.5 Mbps (2×2 MIMO), 5 GHz: up to 4800 Mbps (4×4 MIMO, 160 MHz)
- Max throughput: ~5.3 Gbps
- Gigabit Ethernet port (802.3af PoE input)
- Weather-resistant (IPX5) – indoor/outdoor use
- PoE powered (802.3af PoE)
- Managed via UniFi Network Controller
- Compact design – suitable for ceiling, wall, or pole mounting















Reviews
There are no reviews yet.