-
MikroTik netPower Lite 7R (CSS610‑1Gi‑7R‑2S+OUT) Switch
- 8 × Gigabit Ethernet (7× reverse PoE‑in, 1× PoE‑out)
- 2 × 10G SFP+ fiber uplinks
- 28 Gbps non-blocking throughput, 56 Gbps switching capacity
- Rugged IP54 enclosure, –40 °C to +70 °C
- Flexible powering: reverse-PoE, DC jack, 2-pin terminal
- Passive cooling, low idle (~7 W) power draw
- SwitchOS Lite with VLAN, QoS, mirroring
-
MikroTik CSS610-8G-2S+IN Cloud Router Switch
- 8× Gigabit Ethernet ports
- 2× 10G SFP+ cages for high-speed uplinks
- Fanless, silent desktop design with included rackmount ears
- SwOS: lightweight web-managed OS
- Power input via DC jack or Passive PoE (12–57V)
- Low power consumption: ~5W idle, ~11W max
- Advanced L2 features: VLANs, traffic shaping, MAC filtering
- Compact 1U form factor
-
MikroTik CRS106‑1C‑5S Cloud Router SFP Switch
- 5× 1G SFP ports for fiber connectivity
- 1× Combo port (RJ45/SFP auto-switching)
- Layer 2 non-blocking switching (~6 Gbps total throughput)
- Runs RouterOS with Level 5 license
- Passive PoE or DC jack input (11–30V)
- Compact fanless desktop design
- Console port (RJ45) for management access
- Low power consumption (max 11 W)
-
MikroTik CSS106-1G-4P-1S (RB260GSP) Smart PoE Switch
- 5× Gigabit Ethernet ports (4 with Passive PoE out)
- 1× SFP cage for fiber uplink
- Passive PoE-out: up to 1A per port, 2A total
- Power input: 11–30V via DC jack or PoE-in
- SwOS web-managed smart switch OS
- Switch chip: Atheros QCA8337 with non-blocking Layer 2 performance
- Fanless plastic desktop design
- Low power consumption (~5W idle, ~53W max with PoE load)
-
MikroTik RB260GS Smart Switch (CSS106-5G-1S)
- Ports: 5 × Gigabit Ethernet + 1 × SFP cage (1G)
- Switch Chip: Atheros QCA8337
- Operating System: SwOS – simple web-based management
- Power: 11–30 V DC input (jack or passive PoE), 12V PSU included
- Case: Compact plastic desktop enclosure
- Cooling: Passive (fanless)
- Features: VLANs, port isolation, mirroring, bandwidth control, jumbo frames
- Power Consumption: Max 6 W
- Ideal For: SOHO, home labs, or small edge-switch deployments
-
Netstar NS‑ER7‑F1‑13T Indoor Reverse‑PoE Switch with Fiber uplink
- 7 × 10/100 Mbps RJ45 Reverse PoE Ports
- 1 × 10/100 Mbps SC Fiber Uplink Port /13T: 1310 nm TX / 1550 nm RX /15T: 1550 nm TX / 1310 nm RX
- 12V DC Output for powering ONU/ONT
- Port Isolation – downlinks can’t communicate with each other
- Reverse Powered via Ethernet (24–48V DC)
- Surge, Over-Voltage & Over-Current Protection
- Compact Indoor Design (158 × 60 × 50 mm)
- Ideal for Indoor FTTH/FTTB or Office Deployments
-
Netstar NS‑RP071F‑OD Reverse PoE Switch with Fiber Uplink
- 7 × 10/100 Mbps Reverse PoE Ethernet Ports
- 1 × 10/100 Mbps Single-Fiber SC Uplink Port /13T: 1310 nm TX, 1550 nm RX /15T: 1550 nm TX, 1310 nm RX
- Outdoor-Ready Weatherproof Enclosure
- Powered via RPoE (24V DC) – no external AC needed
- Port Isolation for Enhanced Security
- Surge, Over-Voltage & Over-Current Protection
- Cascadable (Up to 4 Units)
- Ideal for FTTH/ISP Outdoor Last-Mile Deployments
-
Netstar NSW‑RPG071E‑V12 Web‑Smart, Indoor Reverse‑PoE Gigabit Switch
- 7 × 10/100/1000 Mbps Reverse PoE Ports (RPoE in)
- 1 × Gigabit Uplink Port
- 12V DC Output for ONU/ONT
- Web Smart L2 Features (VLAN, QoS, Link Aggregation)
- Powered via 24–48V DC over Ethernet
- Auto-Negotiation & Jumbo Frame Support (9K)
- 2K MAC Address Table & 16 Gbps Switching Capacity
- Indoor-Optimized Design (160×95×28 mm, fanless)
-
Netstar NSW‑RPG071E‑V12‑OD2 (Web‑Smart Gigabit Reverse PoE Switch)
- 7 × Gigabit Reverse PoE Ports (RPoE in)
- 1 × Gigabit Uplink Port
- 12V DC Output for powering ONU/ONT
- Web Smart L2 Management (VLAN, QoS, LAG, Port Isolation)
- Powered via 24–48V DC over Ethernet (no AC required)
- Port-based Isolation & Auto-Negotiation
- Surge, Over-Voltage & Over-Current Protection
- Outdoor-Ready Design (–20 °C to +80 °C)
-
Netstar NS‑ER7‑E1‑V12‑OD2 Unmanaged Remote Powered Switch
- 7 × 10/100 Mbps Remote-Powered Ports (RPoE in)
- 1 × 10/100 Mbps Uplink Port
- 12V DC Output to power ONU/ONT
- Remotely powered via 24V DC (no local power needed)
- Port Isolation (downlink ports can’t talk to each other)
- Surge, Over-Voltage & Over-Current Protection
- Auto-Negotiation & Full Duplex Support
- Cascadable Design (chain multiple units)
- Outdoor-Ready & Compact (158×60×50 mm)
-
Netstar 10/100/1000 Web Smart Passive PoE Switch (NSPW-307P01-24V)
- 7× Gigabit 24V Passive PoE Ports
- 1× Gigabit Uplink Port (non-PoE)
- Total PoE Power Budget: 120W
- Web Smart Management (PoE control, VLAN, bandwidth, trunking)
- Surge, Over-Voltage, and Over-Current Protection
- IGMP Snooping & Spanning Tree Protocol
- Port Mirroring & MAC Binding
- 24V Passive PoE Output (up to 100m range)
-
Netstar 8-Port Gigabit Managed Reverse PoE Switch (NSW-RPG071P)
- 8 Gigabit LAN ports + 1 uplink port
- Reverse PoE (24-48V DC) for power-sharing from user devices
- Supports VLAN, QoS, traffic management for optimized network performance
- IEEE 802.3 standards, ensuring stable and efficient data transmission
- 100m max transmission range
- Compact & fan-cooled design for reliable operation
- Ideal for corridor installations & remote networking setups
