UniFi Device Bridge Pro (UDB-Pro)
January 3, 2026
UniFi Gateway Fiber (UXG-Fiber)
January 3, 2026
UniFi Device Bridge Pro Sector (UDB-Pro-Sector)
- Directional sector-based wireless client bridge
- Dual-band Wi-Fi connectivity
- High-gain antenna for long-range stability
- Gigabit Ethernet output
- Fully managed via UniFi Network Application
The UniFi Device Bridge Pro Sector (UDB-Pro-Sector) is an enterprise-grade wireless client bridge engineered for long-range, directional Wi-Fi connectivity to reliably connect Ethernet-based devices where cabling is impractical. Designed with a sectorized antenna pattern, the UniFi Device Bridge Pro Sector is ideal for campuses, industrial sites, yards, and outdoor deployments requiring stable, low-latency wireless backhaul for critical devices.
Product Overview
The UniFi Device Bridge Pro Sector operates as a dedicated Wi-Fi station that securely associates with UniFi access points and delivers network connectivity through its Ethernet interface. The sector antenna design provides controlled coverage over a defined area, improving signal quality, reducing interference, and enabling consistent performance for multiple remote device placements within the sector.
Wireless Standards & Performance
- Wireless standard: IEEE 802.11ac (Wi-Fi 5)
- Frequency bands:
- 2.4 GHz
- 5 GHz
- Optimized for long-range wireless client bridge operation
- Low-latency and stable wireless-to-Ethernet performance
Antenna & RF Design
- Integrated high-gain sector antenna
- Directional coverage for focused RF distribution
- Reduced interference and improved link stability
- Optimized for outdoor and extended-range deployments
Ethernet & Networking
- 1 × Gigabit Ethernet port
- Transparent Layer 2 bridge functionality
- Supports VLAN tagging and enterprise network segmentation
Power & Installation
- Power method: Power over Ethernet (PoE)
- Single Ethernet cable for power and data
- Wall and pole mounting support
- Designed for rapid outdoor deployment
Management & Security
- Managed through UniFi Network Application
- Centralized provisioning, monitoring, and firmware updates
- Enterprise-grade wireless security with WPA2 and WPA3 support
- Detailed visibility into link quality and performance
Physical & Environmental Design
- Outdoor-capable, weather-resistant enclosure
- Engineered for continuous 24/7 operation
- Suitable for industrial, campus, and enterprise environments
Typical Use Cases
- Wireless backhaul for cameras and access control devices
- Connecting remote Ethernet devices across open areas
- Industrial yards, parking facilities, and campus extensions
Key Features
- Directional sector-based wireless client bridge
- Dual-band Wi-Fi connectivity
- High-gain antenna for long-range stability
- Gigabit Ethernet output
- Fully managed via UniFi Network Application
Meta Description
UniFi Device Bridge Pro Sector (UDB-Pro-Sector) is a directional wireless client bridge with a sector antenna, delivering reliable long-range, PoE-powered Ethernet connectivity over Wi-Fi for enterprise and outdoor deployments.
| Brand | Ubiquiti |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
HPE Aruba Networking CX 6000 24G Class4 PoE 4SFP 370W Switch
- Total Ports: 24 x Gigabit Ethernet (10/100/1000 Mbps) PoE+ ports
- PoE Power Budget: 370W (Supports IEEE 802.3at PoE+, up to 30W per port)
- Uplink Ports: 4 x SFP (1GbE) slots for fiber connectivity
- Switching Capacity: 56 Gbps
- Forwarding Rate: 41.7 Mpps (Million packets per second)
-
Starlink Standard Actuated Kit
The Starlink Standard Actuated Kit is designed to provide high-speed, low-latency satellite internet, featuring a motorized antenna for self-orientation. Below are its key specifications:
- Type: Electronic Phased Array with motorized self-orientation
- Dimensions: 303 mm (L) x 513 mm (D)
- Weight: 2.9 kg (6.4 lbs) without cable; 3.6 kg (7.9 lbs) with 15.2 m (50 ft) cable
- Weather Resistance: IP54-rated for dust and water resistance
- Operating Temperature: -30ºC to 55ºC (-22°F to 131°F)
- Connect up to 185 devices
- WiFi 5
- Dual Band – 3 x 3 MIMO
-
Starlink Flat High Performance Kit
The Starlink Flat High Performance Kit is designed to provide enhanced satellite connectivity, especially for mobile users and environments requiring a wider field of view. Below are its key specifications:
- Type: Electronic Phased Array
- Field of View: 140°, allowing it to see 35% more sky and connect to more satellites
- Dimensions: 575 mm x 511 mm x 41 mm (22.6 in x 20.1 in x 1.6 in)
- Weight: 5.9 kg (13 lbs) without cable
- Environmental Rating: IP56 (dust and water-resistant)
- Wind Resistance: Survivable up to 174 mph
- Wi-Fi Technology: 802.11 a/b/g/n/ac/ax (Wi-Fi 6)
- Radio: Tri-Band 4×4 MU-MIMO
- Ethernet Ports: Two latching LAN ports with removable cover
- Coverage: Up to 297 m² (3,200 ft²)
- Weight: 0.57 kg (1.25 lbs)
-
UniFi U6 In-Wall (U6-IW)
- Wi-Fi 6 (802.11ax) access point
- Dual-band: 2.4 GHz: up to 573.5 Mbps (2×2 MIMO), 5 GHz: up to 4.8 Gbps (4×4 MU-MIMO with 160 MHz)
- 4 Gigabit LAN ports: 1x PoE In (802.3at), 1x PoE Out (802.3af), 3x data-only ports
- Wall-mount design — replaces standard Ethernet wall plates
- Managed via UniFi Network Controller
- Ideal for rooms needing Wi-Fi + Ethernet
- PoE powered (802.3at required for full features)
Reviews
There are no reviews yet.