UniFi Device Bridge (UDB)
January 3, 2026
UniFi Device Bridge Pro Sector (UDB-Pro-Sector)
January 3, 2026
UniFi Device Bridge Pro (UDB-Pro)
- High-performance wireless-to-Ethernet client bridge
- Dual-band Wi-Fi with enhanced RF design
- Gigabit Ethernet output
- PoE-powered with flexible mounting options
- Fully managed through UniFi Network Application
The UniFi Device Bridge Pro (UDB-Pro) is a high-performance wireless client bridge designed to connect Ethernet-based devices to a UniFi Wi-Fi network with enhanced throughput, range, and reliability. The UniFi Device Bridge Pro is optimized for demanding enterprise and outdoor deployments where stable, low-latency wireless-to-wired connectivity is required for critical devices such as cameras, access control systems, industrial equipment, and point-of-sale terminals.
Product Overview
The UniFi Device Bridge Pro operates as a dedicated Wi-Fi station that securely associates with UniFi access points and delivers network connectivity via its Ethernet interface. Compared to the standard UDB, the Pro variant offers improved RF performance, higher throughput capacity, and a more rugged design, all fully integrated into the UniFi ecosystem.
Wireless Standards & Performance
- Wireless standard: IEEE 802.11ac (Wi-Fi 5)
- Frequency bands:
- 2.4 GHz
- 5 GHz
- Optimized for long-range and high-stability client bridge links
- Enhanced throughput and lower latency compared to standard client bridges
Antenna & RF Design
- Integrated high-gain directional antennas
- Focused RF pattern for improved signal strength and reduced interference
- Designed for outdoor and extended-range connectivity
Ethernet & Networking
- 1 × Gigabit Ethernet port
- Transparent Layer 2 bridge operation
- Supports VLAN tagging and advanced network segmentation
Power & Installation
- Power method: Power over Ethernet (PoE)
- Single-cable installation for power and data
- Wall and pole mounting options supported
Management & Security
- Managed via UniFi Network Application
- Centralized configuration, monitoring, and firmware updates
- Enterprise-grade wireless security with WPA2/WPA3 support
- Detailed link quality and performance statistics
Physical & Environmental Design
- Outdoor-capable, weather-resistant enclosure
- Built for continuous 24/7 operation
- Suitable for industrial and enterprise environments
Typical Use Cases
- Wireless backhaul for UniFi Protect cameras
- Connecting remote access control and IoT devices
- Temporary or hard-to-wire enterprise equipment
Key Features
- High-performance wireless-to-Ethernet client bridge
- Dual-band Wi-Fi with enhanced RF design
- Gigabit Ethernet output
- PoE-powered with flexible mounting options
- Fully managed through UniFi Network Application
Meta Description
UniFi Device Bridge Pro (UDB-Pro) is a high-performance wireless client bridge with enhanced range and stability, enabling reliable PoE-powered Ethernet connectivity over Wi-Fi for enterprise and outdoor deployments.
| Brand | Ubiquiti |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
UniFi U6 Mesh Pro (U6-Mesh-Pro)
- Wi-Fi 6 (802.11ax) support
- Dual-band: 2.4 GHz: up to 573.5 Mbps (2×2 MIMO), 5 GHz: up to 4800 Mbps (4×4 MIMO, 160 MHz)
- Max throughput: ~5.3 Gbps
- Gigabit Ethernet port (802.3af PoE input)
- Weather-resistant (IPX5) – indoor/outdoor use
- PoE powered (802.3af PoE)
- Managed via UniFi Network Controller
- Compact design – suitable for ceiling, wall, or pole mounting
-
UniFi Dream Machine Pro (UDM-Pro)
- All-in-one 1U rackmount gateway with firewall, router, switch, NVR, and UniFi OS support
- Dual WAN (1x 1G RJ45, 1x 10G SFP+) with failover and load balancing
- 8x 1G LAN + 1x 10G SFP+ LAN ports
- Quad-core 1.7 GHz CPU, 4 GB RAM, 16 GB storage
- IDS/IPS throughput up to 3.5 Gbps, Deep Packet Inspection, and advanced firewall
- Supports UniFi SD-WAN, VPN (IPsec, WireGuard, OpenVPN, Teleport), and policy-based routing
- Built-in 3.5″ HDD bay for UniFi Protect (NVR)
- Runs UniFi Network, Protect, Access, Talk, and Connect apps
- Redundant power ready via UniFi SmartPower (USP-RPS)
-
Starlink Flat High Performance Kit
The Starlink Flat High Performance Kit is designed to provide enhanced satellite connectivity, especially for mobile users and environments requiring a wider field of view. Below are its key specifications:
- Type: Electronic Phased Array
- Field of View: 140°, allowing it to see 35% more sky and connect to more satellites
- Dimensions: 575 mm x 511 mm x 41 mm (22.6 in x 20.1 in x 1.6 in)
- Weight: 5.9 kg (13 lbs) without cable
- Environmental Rating: IP56 (dust and water-resistant)
- Wind Resistance: Survivable up to 174 mph
- Wi-Fi Technology: 802.11 a/b/g/n/ac/ax (Wi-Fi 6)
- Radio: Tri-Band 4×4 MU-MIMO
- Ethernet Ports: Two latching LAN ports with removable cover
- Coverage: Up to 297 m² (3,200 ft²)
- Weight: 0.57 kg (1.25 lbs)
-
Ruijie RG-AP9861-R Access Point
- Wi-Fi 7 (802.11be) with up to 24.436 Gbps total throughput
- 18 spatial streams across 5 radios (including a dedicated AI radio)
- Tri-band support: 2.4 GHz, 5 GHz, and 6 GHz
- Built-in AI Radio for real-time network scanning and optimization
- 4096-QAM & 320 MHz channel width for ultra-fast speeds
- Smart Antennas for beamforming and enhanced coverage
- 10GE uplink port (SFP+/RJ45 combo)
- PoE++ (802.3bt) and DC power options
Reviews
There are no reviews yet.