
Teltonika RUT955 – 4G LTE Wi-Fi Dual-SIM Router
July 10, 2025
Teltonika RUTX11 LTE-A Cat 6 Gigabit Cellular Router
July 10, 2025Teltonika RUTX09 LTE-A Cat 6 Gigabit Cellular Router
- 4G LTE-A Cat 6 with speeds up to 300 Mbps download
- Dual SIM slots with automatic failover for uninterrupted connectivity
- 4× Gigabit Ethernet ports with WAN failover and load balancing
- Rugged industrial design with −40 °C to +75 °C operating range
- Built-in GNSS module for GPS tracking and location services
- Advanced VPN support including OpenVPN, IPsec, WireGuard, and more
- Digital input/output for industrial automation and remote control
- Secure remote management via Teltonika RMS and RutOS platform
- Quad-core CPU and 256 MB RAM for high-performance networking
- Wide voltage support (9–50 V DC) and passive PoE compatibility
Description
The Teltonika RUTX09 LTE-A Cat 6 Gigabit Cellular Router is an industrial-grade LTE-A Cat 6 router designed for primary or backup internet connectivity in mission-critical IoT and M2M deployments. With cellular speeds up to 300 Mbps and full networking support, it delivers enterprise-level performance in a compact form.
Cellular & SIM
- 4G LTE Cat 6: Up to 300 Mbps downlink, 50 Mbps uplink
- 3G/2G fallback for universal connectivity
- Dual external mini‑SIM slots: Automatic switching for signal strength, data limits, roaming, idle protection
Hardware & Memory
- CPU: Qualcomm-based quad-core Arm Cortex-A7 @ 717 MHz
- Memory: 256 MB DDR3 RAM; Flash Storage: 256 MB
- Ethernet: Four Gigabit ports (1 configurable WAN + 3 LAN) supporting VLAN (up to 128 tags)
GNSS & Antennas
- GNSS support: GPS, GLONASS, Galileo, BeiDou, QZSS
- Antenna Ports: 2× LTE SMA; 1× GNSS SMA
I/O & Ports
- Digital I/O: 1 digital input, 1 open-collector output (max 30 V/300 mA) via 4‑pin connector
- USB Host: 1× USB-A
- SIM reset button and factory reset button
Power & Physical
- Input: 9–50 V DC via 4‑pin terminal; supports passive PoE (not IEEE 802.3af/at)
- Consumption: Typical <11–18 W depending on workload
- Housing: Full aluminum with grounding screw; Ingress Protection: IP30
- Mountable: DIN‑rail, wall, or flat surface
- Size: 115 × 95 × 44 mm; Weight: ~455 g
Networking & Security
- WAN Failover & Load Balancing: Between cellular and Ethernet using ICMP checks
- Routing: Static & dynamic (BGP, OSPF, RIP, EIGRP, VRRP, policy-based)
- Protocols: IPv4/IPv6, TCP/UDP, ICMP, DHCP, NAT, DNS, VLAN, QoS, PPPoE, SNMP, Syslog
- VPNs Supported: OpenVPN, IPsec, GRE, L2TP, PPTP, SSTP, WireGuard, DMVPN, Stunnel, ZeroTier
- Firewall & Security: Stateful inspection, DoS protection, MAC/IP filtering, VLAN tagging
Software & Management
- OS: RutOS (OpenWrt-based)
- Access: Web UI, SSH, CLI, SMS, API (JSON-RPC), SNMP, TR-069
- Monitoring & Automation: RMS integration, SMS alerts, ping or periodic reboot, NTP, Connection watchdog
- IoT Protocols: MQTT, Modbus, DNP3, DLMS, SNTP, Samba, Wake-on-LAN, DDNS
Environmental Specifications
- Operating Temp: –40 °C to +75 °C
- Humidity: 10–90% non‑condensing
- EMC & Immunity: Compliant with EN 55032, EN 301 489, EN 61000-4 series
- Approvals: CE/RED, EAC, RoHS, WEEE; Automotive E‑Mark; UL/CSA safety
Package Contents
- RUTX09 router
- 18 W power supply
- 2× LTE swivel antennas
- 1× adhesive GNSS antenna (3 m cable)
- SIM adapters, Ethernet cable, Quick Start Guide, RMS flyer
Meta Description
Teltonika RUTX09 is a rugged LTE-A Cat 6 industrial router featuring dual SIM, Carrier Aggregation (up to 300 Mbps), Gigabit Ethernet, GNSS, USB host, digital I/O, advanced VPN and firewall support, and full remote management—all in a compact aluminum housing.
Additional information
| Brand | Teltonika |
|---|
Related products
-
UniFi U6 Enterprise (U6-Enterprise)
- Tri-band WiFi 6E (2.4 GHz, 5 GHz, 6 GHz)
- Up to 10.2 Gbps aggregate throughput
- 4×4 MU-MIMO on 5 GHz & 6 GHz
- 2.5 GbE PoE+ port
- Supports 600+ clients
- Advanced roaming (802.11r/k/v)
- Compact, wall/ceiling mountable
- Bluetooth for setup
- UniFi Network app compatible
-
UniFi Dream Machine Special Edition (UDM-SE)
- Processor: Quad-Core ARM Cortex-A57 @ 1.7 GHz
- RAM: 4 GB DDR4
- Storage: 16 GB eMMC + 128 GB SSD (NVR)
- Ports: 1 × 10G SFP+, 1 × 2.5G RJ45 WAN; 8 × 1G RJ45 (6 PoE, 2 PoE+)
- PoE Budget: 180W
- Security: IDS/IPS, VPN support, Threat Protection
- Display: 1.3″ LCM touchscreen
- Dimensions: 442.4 × 43.7 × 285.6 mm (1U rackmount)
-
UniFi Cloud Gateway Max (UCG-Max)
- 2.5 Gbps Throughput: High-speed data transfer with up to 2.5 Gbps throughput.
- Multi-WAN Support: Handles multiple WAN connections for load balancing and failover.
- Advanced Routing: Supports OSPF, BGP, static routing, and VPN configurations.
- Security: Built-in firewall, VPN support, IDS/IPS, and DDoS protection.
- UniFi Integration: Seamless integration with the UniFi Network Controller and Cloud management.
- 512GB SSD: Pre-installed for fast storage and system performance.
- 4 x 2.5GbE Ports: For high-speed local network connections.
- IPv6 Support: Fully compatible with IPv6 for modern networks.
- Rackmountable: 1U form factor for easy installation in server racks.
- Zero-Touch Provisioning: Easy device deployment and configuration.
-
UniFi U6 Mesh (U6-Mesh)
- Wi-Fi 6 (802.11ax) dual-band AP
- 2.4 GHz: up to 573.5 Mbps (2×2 MIMO)
- 5 GHz: up to 2402 Mbps (2×2 MU-MIMO with 160 MHz support)
- Total throughput: ~3 Gbps
- Compact, sleek design for flexible indoor or outdoor use
- Weather-resistant (IPX5) – suitable for sheltered outdoor environments
- 1x Gigabit Ethernet port (802.3af PoE input)
- Mesh-capable – great for wireless uplinks in UniFi networks
- Mounting options included (pole, wall, ceiling)














