Netstar NS‑ER7‑E1‑V12‑OD2 Unmanaged Remote Powered Switch
June 11, 2025
Netstar NSW‑RPG071E‑V12 Web‑Smart, Indoor Reverse‑PoE Gigabit Switch
June 11, 2025
Netstar NSW‑RPG071E‑V12‑OD2 (Web‑Smart Gigabit Reverse PoE Switch)
- 7 × Gigabit Reverse PoE Ports (RPoE in)
- 1 × Gigabit Uplink Port
- 12V DC Output for powering ONU/ONT
- Web Smart L2 Management (VLAN, QoS, LAG, Port Isolation)
- Powered via 24–48V DC over Ethernet (no AC required)
- Port-based Isolation & Auto-Negotiation
- Surge, Over-Voltage & Over-Current Protection
- Outdoor-Ready Design (–20 °C to +80 °C)
Here are the detailed specifications for the Netstar NSW‑RPG071E‑V12‑OD2 — a Web Smart Outdoor Gigabit Reverse PoE Switch:
🔌 Ports & Power
| Feature | Specification |
|---|---|
| Downlink Ports | 7 × 10/100/1000 Mbps Reverse PoE RJ45 (RPoE in) |
| Uplink Port | 1 × 10/100/1000 Mbps RJ45 |
| Power Input | Reverse PoE, 24–48 V DC via Ethernet (pins 4/5+, 7/8–) |
| Power Output | 12 V DC via 2.1 mm jack – for ONU/ONT powering |
| Power Budget | ~120 W max (PoE in dependent) |
🌐 Network Features
- Web Smart Management (L2):
- VLAN support (Port-based, IEEE 802.1Q)
- QoS
- Port Isolation
- Link Aggregation (LAG)
- Bandwidth Control
- Port Mirroring
- Auto-Negotiation: Supports 10/100/1000 Mbps (half/full duplex)
- Flow Control: IEEE 802.3x full duplex & backpressure half duplex
- MAC Table: 1K entries
- Packet Buffer Memory: 448 Kbits
- Switching Capacity: Up to 16 Gbps
- Forwarding Rate: 11.9 Mpps
⚡ Electrical & Protection Features
- Reverse PoE Input: One port supplies power to the switch and output (no AC required)
- Port Protection:
- Surge Protection: 2.5 kV on all ports
- Over-voltage Protection: Switch shuts down above 50 V DC
- Over-current Protection: Each port fuse auto-recovers
- Grounding Terminal: For lightning protection grounding
📦 Mechanical & Environmental
| Attribute | Value |
|---|---|
| Casing | Rugged outdoor-grade metal/plastic (IP-rated for weather resistance) |
| Dimensions | ~160 mm (W) × 95 mm (D) × 28 mm (H) |
| Weight | ~150–200 grams |
| Operating Temp | –20 °C to +80 °C |
| Storage Temp | –30 °C to +90 °C |
| Humidity | 5% to 95% RH (non-condensing) |
🏗️ Installation & Use Cases
- Mounting Options: Pole or wall mounting compatible (outdoor kit needed)
- Use Case: Designed for WISP/ISP last-mile deployments, powering ONUs remotely without local power
- Cascading: Supports daisy-chaining switches for extended coverage
✅ Ideal For:
- Outdoor FTTH ONU deployments
- Shared fiber-to-building with gigabit output
- Scenarios where power is only available at the subscriber side
- ISPs looking to reduce CPE power infrastructure costs
| Brand | Netstar |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
Ruijie RG-AP9861-R Access Point
- Wi-Fi 7 (802.11be) with up to 24.436 Gbps total throughput
- 18 spatial streams across 5 radios (including a dedicated AI radio)
- Tri-band support: 2.4 GHz, 5 GHz, and 6 GHz
- Built-in AI Radio for real-time network scanning and optimization
- 4096-QAM & 320 MHz channel width for ultra-fast speeds
- Smart Antennas for beamforming and enhanced coverage
- 10GE uplink port (SFP+/RJ45 combo)
- PoE++ (802.3bt) and DC power options
-
UniFi U6 Mesh (U6-Mesh)
- Wi-Fi 6 (802.11ax) dual-band AP
- 2.4 GHz: up to 573.5 Mbps (2×2 MIMO)
- 5 GHz: up to 2402 Mbps (2×2 MU-MIMO with 160 MHz support)
- Total throughput: ~3 Gbps
- Compact, sleek design for flexible indoor or outdoor use
- Weather-resistant (IPX5) – suitable for sheltered outdoor environments
- 1x Gigabit Ethernet port (802.3af PoE input)
- Mesh-capable – great for wireless uplinks in UniFi networks
- Mounting options included (pole, wall, ceiling)
-
Starlink Enterprise Kit
The Starlink Enterprise Kit is tailored for business applications, offering enhanced performance and reliability. Below are its key specifications:
- Type: Electronic Phased Array
- Field of View: 110°
- Orientation: Software-assisted manual positioning
- Dimensions: 594 mm x 383 mm x 39.7 mm (23.4 in x 15.07 in x 1.5 in)
- Weight: 2.9 kg (6.4 lbs); 3.2 kg (7 lbs) with kickstand
- Environmental Rating: IP67 (dust and water-resistant)
- Wind Resistance: Operational up to 96 kph (60 mph)
- Power Consumption: Average 75–100 W
-
HPE Aruba Networking CX 6000 24G Class4 PoE 4SFP 370W Switch
- Total Ports: 24 x Gigabit Ethernet (10/100/1000 Mbps) PoE+ ports
- PoE Power Budget: 370W (Supports IEEE 802.3at PoE+, up to 30W per port)
- Uplink Ports: 4 x SFP (1GbE) slots for fiber connectivity
- Switching Capacity: 56 Gbps
- Forwarding Rate: 41.7 Mpps (Million packets per second)
Reviews
There are no reviews yet.