MikroTik RBD962UiGS‑5HacT2HnT (hAP ac)
July 19, 2025
MikroTik RB951Ui-2HnD (hEX lite)
July 19, 2025
MikroTik RBD25G‑5HPacQD2HPnD (Audience)
- Tri-band Wi-Fi: one 2.4 GHz (300 Mbps) + two 5 GHz radios (up to 867 Mbps each)
- Mesh-ready with auto-sync functionality
- Dual Gigabit Ethernet ports
- Quad-core high-performance CPU with 256 MB RAM
- High antenna gain for robust coverage
- Passive PoE and DC power input options
- Silent passive cooling
- RouterOS Level 4 for advanced routing and firewall capabilities
The MikroTik RBD25G‑5HPacQD2HPnD (Audience) is a tri-band home access point designed for expansive Wi-Fi coverage in large homes or small offices. Equipped with mesh capabilities, it features one 2.4 GHz and two 5 GHz radios, high-performance antennas, and advanced networking features via RouterOS Level 4.
Hardware Specifications
- Product Code: RBD25G‑5HPacQD2HPnD
- CPU: Qualcomm IPQ‑4019, quad-core (auto 448–896 MHz)
- Architecture: ARM 32‑bit
- RAM: 256 MB
- Storage: 128 MB NAND + 2 MB Flash
- RouterOS License: Level 4
- MTBF: ~200,000 hours at 25 °C
- Dimensions: 100 × 235 × 97 mm
- Operating Temperature: –40 °C to +60 °C
- PoE-in: Passive PoE or 802.3af/at (24–57 V) / DC jack (12–57 V)
- Max Power Consumption: ~27 W under full load
- Cooling: Passive (no fans)
- Ports: 2 × Gigabit Ethernet
Wireless Capabilities
- 2.4 GHz Radio:
- Standard: 802.11b/g/n (Wi‑Fi 4)
- Chains: 2×2 MIMO
- Max Rate: 300 Mbps
- Antenna Gain: ~3.5 dBi
- 5 GHz Radios (two independent):
- Standard: 802.11a/n/ac (Wi‑Fi 5)
- Chains: 4×4 MIMO on one radio; 2×2 MIMO on the other
- Max Rate: 867 Mbps (per 2×2 chain); combined throughput significantly higher
- Antenna Gain: ~4.5 dBi per radio
- Tri-band Operation: Simultaneous use of all three radios
- Mesh Support: Auto-meshing with other Audience units
Networking & Expansion
- Ethernet Ports: 2 × Gigabit RJ-45
- Mode Button: Press to initiate mesh or sync
- LED Indicators: Status, power, wireless activity
Performance
- Ethernet Throughput: ~1.9 Gbps routing performance (large packet)
- VPN/IPsec: Hardware-assisted ~400 Mbps rated
- Mesh Coverage: A single unit can cover ~1,858 m² in testing conditions
Use Cases
Designed for seamless, high-performance home networking where full coverage and minimal configuration are priorities. Ideal for large or multi-story homes, mesh expansion setups, and environments seeking wired backup via Ethernet.
📝 Meta Description
MikroTik Audience (RBD25G‑5HPacQD2HPnD) is a tri-band mesh-capable home access point offering robust Wi-Fi 4/5 coverage, dual Gigabit ports, quad-core CPU, PoE support, and RouterOS Level 4—ideal for full-home connectivity.
| Brand | MikroTik |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
Starlink Flat High Performance Kit
The Starlink Flat High Performance Kit is designed to provide enhanced satellite connectivity, especially for mobile users and environments requiring a wider field of view. Below are its key specifications:
- Type: Electronic Phased Array
- Field of View: 140°, allowing it to see 35% more sky and connect to more satellites
- Dimensions: 575 mm x 511 mm x 41 mm (22.6 in x 20.1 in x 1.6 in)
- Weight: 5.9 kg (13 lbs) without cable
- Environmental Rating: IP56 (dust and water-resistant)
- Wind Resistance: Survivable up to 174 mph
- Wi-Fi Technology: 802.11 a/b/g/n/ac/ax (Wi-Fi 6)
- Radio: Tri-Band 4×4 MU-MIMO
- Ethernet Ports: Two latching LAN ports with removable cover
- Coverage: Up to 297 m² (3,200 ft²)
- Weight: 0.57 kg (1.25 lbs)
-
UniFi Cloud Gateway Max (UCG-Max)
- 2.5 Gbps Throughput: High-speed data transfer with up to 2.5 Gbps throughput.
- Multi-WAN Support: Handles multiple WAN connections for load balancing and failover.
- Advanced Routing: Supports OSPF, BGP, static routing, and VPN configurations.
- Security: Built-in firewall, VPN support, IDS/IPS, and DDoS protection.
- UniFi Integration: Seamless integration with the UniFi Network Controller and Cloud management.
- 512GB SSD: Pre-installed for fast storage and system performance.
- 4 x 2.5GbE Ports: For high-speed local network connections.
- IPv6 Support: Fully compatible with IPv6 for modern networks.
- Rackmountable: 1U form factor for easy installation in server racks.
- Zero-Touch Provisioning: Easy device deployment and configuration.
-
UniFi U6 Pro (U6-Pro)
- Wi-Fi 6 (802.11ax) for faster speeds and improved capacity.
- Dual-band: 2.4 GHz (574 Mbps) and 5 GHz (4.8 Gbps) with 4×4 MU-MIMO.
- Max. Client Capacity: Supports 300+ clients.
- Advanced Security: WPA3 encryption, 802.11r fast roaming, and 802.11k/v for seamless roaming.
- Coverage Area: Up to 200 m² (2,150 ft²).
- Power over Ethernet (PoE+) for flexible installation.
- Centralized Management: Easily managed via the UniFi Network Controller or mobile app.
- Weather-resistant: IP54 rating for indoor and sheltered outdoor use.
- High Client Density: Suitable for high-density environments with multiple devices.
-
UniFi U6 + (U6-Plus)
- Wi-Fi 6 (802.11ax) support
- Dual-band: 2.4 GHz (573.5 Mbps) & 5 GHz (2402 Mbps)
- 2×2 MIMO on both bands
- 1x GbE RJ45 port (802.3af PoE)
- Compact indoor design
- Ceiling/wall mountable
- Managed via UniFi Network Controller
- Up to ~3 Gbps aggregate throughput
Reviews
There are no reviews yet.