D-Link 8-Port Gigabit PoE Smart Managed Switch (DGS-1100-08P)
May 28, 2025
D-Link 18-Port Gigabit Smart Managed PoE+ Switch (DGS-F1210-18PS-E)
May 28, 2025
D-Link 8 Port PoE Gigabit Smart Managed Switch + 2 SFP (DGS-F1100-10PS-E)
250M 10-Port 10/100/1000 Smart Switch with 8 PoE+ Ports & 2 Uplink Ports
The D-Link DGS-F1100-10PS-E is a 10 port Smart Managed Gigabit Switch with 8/10/100/1000 Mbps PoE ports, 2 Gigabit SFP uplink ports. This Switch enables users to easily connect and supply power to PoE-capable devices such as wireless Access Points (APs), IP cameras.
– 8x 10/100/1000 Mbps PoE Ethernet ports
– 2x Uplink ports
– IEEE 802.3af/at Power Over Ethernet (PoE) enables installation in hard to reach locations
– 96 W total power budget
– Up to 30 W power output per PoE port
Below is a detailed specification sheet for the D-Link DGS-F1100-10PS-E – an 8-Port PoE+ Gigabit Smart Managed Switch with 2 SFP Uplink Ports.
D-Link DGS-F1100-10PS-E – 10-Port Gigabit Smart Managed PoE+ Switch
🔌 Hardware Overview
- Ports:
- 8 × 10/100/1000 Mbps PoE+ RJ45 ports
- 2 × Gigabit SFP uplink ports
- Switching Capacity: 20 Gbps
- Forwarding Rate: 14.88 Mpps
- MAC Address Table: 8K entries
- Jumbo Frame Support: Up to 10,240 bytes
- Packet Buffer Size: 1.5 MB
- PoE Standards: IEEE 802.3af/at
- PoE Budget: Up to 130W total, 30W max per port
- Transmission Distance: Up to 250m on ports 1–8 with Extend mode enabled
- Lightning Protection: 6kV surge protection
⚙️ Software & Management Features
- Management Interfaces:
- Web-based GUI (HTTP/HTTPS)
- Command Line Interface (CLI) via Telnet/SSH
- SNMP v1/v2c/v3
- D-Link Network Assistant (DNA) utility
- VLAN Support:
- 802.1Q VLAN
- Port-based VLAN
- Voice VLAN
- Asymmetric VLAN
- Auto Surveillance VLAN 2.0
- Quality of Service (QoS):
- 8 queues per port
- 802.1p CoS, DSCP, SP, WRR, DRR scheduling
- Time-based QoS
- Security Features:
- Access Control Lists (ACLs)
- Port Security
- 802.1X Authentication
- IP-MAC-Port Binding
- DoS Protection
- DHCP Snooping
- SSL, SSH, HTTPS support
- Layer 2 Features:
- Spanning Tree Protocol (STP), Rapid STP (RSTP), Multiple STP (MSTP)
- Link Aggregation (Static and LACP)
- IGMP Snooping v1/v2
- Loopback Detection
- Port Mirroring
- Storm Control (Broadcast/Multicast/Unicast)
- IPv6 Support:
- IPv6 Ping, Traceroute, Telnet, SSH
- IPv6 SNMP, LLDP
- IPv6 DHCP Client
🌿 Energy Efficiency
- Energy-Efficient Ethernet (EEE): Compliant with IEEE 802.3az
- Power Saving Features:
- Link status detection
- LED shut-off
- Port shut-off
- System hibernation
- Time-Based PoE: Schedule PoE power delivery
📏 Physical & Environmental Specifications
- Dimensions: 294 × 180 × 44 mm
- Weight: 1.67 kg
- Operating Temperature: -10°C to 55°C
- Storage Temperature: -20°C to 70°C
- Operating Humidity: 0% to 95% RH (non-condensing)
- Storage Humidity: 50% to 90% RH
- Maximum Power Consumption:
- 154W (with PoE)
- 10.79W (without PoE)
- Acoustic Noise: 51.9 dB(A)
- MTBF: Approximately 376,888 hours
📦 Package Contents
- DGS-F1100-10PS-E Switch
- Power Adapter
- User Manual
- Rack Mount Kit
- Wall Mount Brackets
| Brand | Dlink |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
Starlink Standard Actuated Kit
The Starlink Standard Actuated Kit is designed to provide high-speed, low-latency satellite internet, featuring a motorized antenna for self-orientation. Below are its key specifications:
- Type: Electronic Phased Array with motorized self-orientation
- Dimensions: 303 mm (L) x 513 mm (D)
- Weight: 2.9 kg (6.4 lbs) without cable; 3.6 kg (7.9 lbs) with 15.2 m (50 ft) cable
- Weather Resistance: IP54-rated for dust and water resistance
- Operating Temperature: -30ºC to 55ºC (-22°F to 131°F)
- Connect up to 185 devices
- WiFi 5
- Dual Band – 3 x 3 MIMO
-
STARLINK STANDARD KIT
The Starlink Standard Kit provides satellite-based high-speed, low-latency internet, making it ideal for remote and rural areas. Below are the key specifications:
- Connect up to 235 devices
- WiFi 6
- Tri Band 4 x 4 MU-MIMO
-
UniFi Dream Machine Special Edition (UDM-SE)
- Processor: Quad-Core ARM Cortex-A57 @ 1.7 GHz
- RAM: 4 GB DDR4
- Storage: 16 GB eMMC + 128 GB SSD (NVR)
- Ports: 1 × 10G SFP+, 1 × 2.5G RJ45 WAN; 8 × 1G RJ45 (6 PoE, 2 PoE+)
- PoE Budget: 180W
- Security: IDS/IPS, VPN support, Threat Protection
- Display: 1.3″ LCM touchscreen
- Dimensions: 442.4 × 43.7 × 285.6 mm (1U rackmount)
-
UniFi Dream Machine Pro Max (UDM-Pro-Max)
The UniFi Dream Machine Pro Max (UDM-Pro-Max) is a high-performance, 1U rackmount UniFi Cloud Gateway featuring a 2.0 GHz quad-core CPU, 8 GB RAM, 32 GB eMMC, 128 GB SSD, and dual 3.5″ HDD bays with RAID support. It offers dual WAN (2.5GbE & 10G SFP+), 8x 1G LAN, 10G SFP+ LAN, and 5 Gbps IDS/IPS throughput. Designed for large-scale UniFi deployments, it runs all UniFi OS apps (Network, Protect, Access, Talk, Connect), supports RAID, SD-WAN, VPN, QoS, and up to 2,000+ clients—ideal for advanced enterprise networks.
Reviews
There are no reviews yet.