
D-Link 8 Port PoE Gigabit Smart Managed Switch + 2 SFP (DGS-F1100-10PS-E)
May 28, 2025
D-Link 26-Port Gigabit PoE + 2 SFP Switch (DGS-F1026P-E)
May 28, 2025D-Link 18-Port Gigabit Smart Managed PoE+ Switch (DGS-F1210-18PS-E)
- 18 Gigabit Ports: 16 RJ45 and 2 SFP
- 16 PoE Ports with 135 Watts power budget
- 8 Ports with 250m Long Reach PoE Technology
- 36Gbps Switching capacity
- No-configuration shortcut buttons
- LACP, RSTP, MSTP, ERPS and more
- Advanced Security Features
SKU: DGS-F1210-18PS-E
Categories: D-Link & Tp-Link, Networking Infrastructure, Switches
Tags: Dlink networking Ruijie switches
The DGS-F1210 Series is a diverse group of Gigabit Long Reach PoE Smart Managed Switches. With a wide variety of port options, you can provide power for your PoE powered devices such as IP Cameras, CCTV, VoIP, Wi-Fi Access Points etc. There is one to suit any budget or requirement.
Here are the detailed specifications for the D-Link DGS-F1210-18PS-E 18-Port Layer 2 Gigabit Managed Long Range PoE+ Surveillance Switch:
📘 D-Link DGS-F1210-18PS-E – 18-Port Gigabit Smart Managed PoE+ Switch
🔌 Hardware Overview
- Ports:
- 16 × 10/100/1000 Mbps PoE+ RJ45 ports
- 2 × Gigabit SFP uplink ports
- Switching Capacity: 36 Gbps
- Forwarding Rate: 23.8 Mpps
- MAC Address Table: 8K entries
- Packet Buffer Size: 4.1 Mbits
- PoE Standards: IEEE 802.3af/at
- PoE Budget: Up to 150W total
- Long Reach PoE: Supports up to 250m on ports 1–8 with Extend mode enabled
- Lightning Protection: 6kV surge protection
⚙️ Software & Management Features
- Management Interfaces:
- Web-based GUI (HTTP/HTTPS)
- Command Line Interface (CLI) via Telnet/SSH
- SNMP v1/v2c/v3
- VLAN Support:
- 802.1Q VLAN
- MAC VLAN
- IP VLAN
- Voice VLAN
- Supports up to 4K VLANs
- Quality of Service (QoS):
- 8 queues per port
- 802.1p CoS, DSCP, SP, WRR, WFQ scheduling
- Security Features:
- Access Control Lists (ACLs)
- Port Security
- 802.1X Authentication
- IP-MAC-Port Binding
- DoS Protection
- DHCP Snooping
- SSL, SSH, HTTPS support
- Layer 2 Features:
- Spanning Tree Protocol (STP), Rapid STP (RSTP), Multiple STP (MSTP)
- Link Aggregation (Static and LACP)
- IGMP Snooping v1/v2
- Loopback Detection
- Port Mirroring
- Storm Control (Broadcast/Multicast/Unknown Unicast)
- IPv6 Support:
- IPv6 Ping, Traceroute, Telnet, SSH
- IPv6 SNMP, LLDP
- IPv6 DHCP Client
🌿 Energy Efficiency
- Energy-Efficient Ethernet (EEE): Compliant with IEEE 802.3az
- Power Saving Features:
- Link status detection
- LED shut-off
- Port shut-off
- System hibernation
- Time-Based PoE: Schedule PoE power delivery
📏 Physical & Environmental Specifications
- Dimensions: 440 × 180 × 44 mm
- Weight: 2.3 kg
- Operating Temperature: 0°C to 40°C
- Storage Temperature: -20°C to 70°C
- Operating Humidity: 10% to 90% RH (non-condensing)
- Storage Humidity: 10% to 95% RH
- Power Input: 100-240 VAC, 50-60 Hz
- Maximum Power Consumption: 150W(D-Link)
📦 Package Contents
- DGS-F1210-18PS-E Switch
- Power Adapter
- User Manual
- Rack Mount Kit
| Brand | Dlink |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
UniFi Express (UX)
- All-in-one WiFi 6 router + access point
- Dual-band 2×2 WiFi 6 (up to 2.4 Gbps)
- 2× Gigabit ports (1 WAN, 1 LAN)
- Compact, fanless design (USB-C powered)
- Runs UniFi Network app
- Supports VPN (Teleport, WireGuard, IPsec, etc.)
- Firewall, VLANs, content filtering
- 0.96″ status display
- Easy setup via Bluetooth or Ethernet
-
Starlink Standard Actuated Kit
The Starlink Standard Actuated Kit is designed to provide high-speed, low-latency satellite internet, featuring a motorized antenna for self-orientation. Below are its key specifications:
- Type: Electronic Phased Array with motorized self-orientation
- Dimensions: 303 mm (L) x 513 mm (D)
- Weight: 2.9 kg (6.4 lbs) without cable; 3.6 kg (7.9 lbs) with 15.2 m (50 ft) cable
- Weather Resistance: IP54-rated for dust and water resistance
- Operating Temperature: -30ºC to 55ºC (-22°F to 131°F)
- Connect up to 185 devices
- WiFi 5
- Dual Band – 3 x 3 MIMO
-
UniFi Cloud Gateway Max (UCG-Max)
- 2.5 Gbps Throughput: High-speed data transfer with up to 2.5 Gbps throughput.
- Multi-WAN Support: Handles multiple WAN connections for load balancing and failover.
- Advanced Routing: Supports OSPF, BGP, static routing, and VPN configurations.
- Security: Built-in firewall, VPN support, IDS/IPS, and DDoS protection.
- UniFi Integration: Seamless integration with the UniFi Network Controller and Cloud management.
- 512GB SSD: Pre-installed for fast storage and system performance.
- 4 x 2.5GbE Ports: For high-speed local network connections.
- IPv6 Support: Fully compatible with IPv6 for modern networks.
- Rackmountable: 1U form factor for easy installation in server racks.
- Zero-Touch Provisioning: Easy device deployment and configuration.
-
Starlink Enterprise Kit
The Starlink Enterprise Kit is tailored for business applications, offering enhanced performance and reliability. Below are its key specifications:
- Type: Electronic Phased Array
- Field of View: 110°
- Orientation: Software-assisted manual positioning
- Dimensions: 594 mm x 383 mm x 39.7 mm (23.4 in x 15.07 in x 1.5 in)
- Weight: 2.9 kg (6.4 lbs); 3.2 kg (7 lbs) with kickstand
- Environmental Rating: IP67 (dust and water-resistant)
- Wind Resistance: Operational up to 96 kph (60 mph)
- Power Consumption: Average 75–100 W















Reviews
There are no reviews yet.