
D-Link 18-Port Gigabit Smart Managed PoE+ Switch (DGS-F1210-18PS-E)
May 28, 2025
D-Link 26-Port Gigabit Smart Managed PoE+ Switch (DGS-F1210-26PS-E)
May 28, 2025D-Link 26-Port Gigabit PoE + 2 SFP Switch (DGS-F1026P-E)
- 24 10/100/1000 Mbps gigabit ethernet ports
- 2 SFP port
- 250watts available PoE
- Flow control for protection against loss data
- Maximum distance of 250m
- Light protection (6kV)
- Operating Temperature: 0 to 40 deg C (32 to 104 deg F)
The DGS-F1026P-E is a Plug-and-Play device that requires no configuration, so setup is simple and hassle-free, and you can easily connect multiple computers, share files, music, and video across your home or small office network, or even create a multiplayer gaming environment. 802.3x flow control on each port minimizes dropped packets when the port’s receiving buffer is full, giving you a more reliable connection for all of your connected devices.
Here’s a detailed overview of the D-Link DGS-F1026P-E 24-Port Gigabit PoE+ Switch with 2 SFP Uplink Ports:
📘 D-Link DGS-F1026P-E – 24-Port Gigabit PoE+ Switch with 2 SFP Uplinks
🔌 Hardware Overview
- Ports:
- 24 × 10/100/1000 Mbps PoE+ RJ45 ports
- 2 × Gigabit SFP uplink ports
- Switching Capacity: 52 Gbps
- Forwarding Rate: 38.69 Mpps
- MAC Address Table: 8K entries
- PoE Standards: IEEE 802.3af/at
- PoE Budget: Up to 250W total, 30W max per port
- Extended PoE Range: Up to 250 meters on ports 1–8 with Extend mode enabled
- Lightning Protection: 6kV surge protection
⚙️ Software & Management Features
- Operating Modes (via DIP switch):
- Extend Mode: Enables 250m PoE transmission on ports 1–8
- VLAN Mode: Isolates ports 1–24 to prevent broadcast storms
- QoS Mode: Prioritizes video data for smoother transmission
- PoE Reset Mode: Allows remote rebooting of PoE devices
- Plug & Play Installation: No configuration required
- Flow Control: IEEE 802.3x for reliable data transmission
🌿 Energy Efficiency
- Energy-Efficient Ethernet (EEE): Compliant with IEEE 802.3az
- Power Saving Features:
- Link status detection
- Port shut-off
📏 Physical & Environmental Specifications
- Dimensions: 440 × 180 × 44 mm
- Weight: 3.0 kg
- Operating Temperature: 0°C to 40°C
- Storage Temperature: -20°C to 70°C
- Operating Humidity: 0% to 95% RH (non-condensing)
- Storage Humidity: 0% to 95% RH
- Power Input: 100-240 VAC, 50-60 Hz
- Maximum Power Consumption: 250W
📦 Package Contents
- DGS-F1026P-E Switch
- Power Cord
- Rack Mount Kit
- User Manual
| Brand | Dlink |
|---|
Only logged in customers who have purchased this product may leave a review.
Related products
-
Starlink Standard Actuated Kit
The Starlink Standard Actuated Kit is designed to provide high-speed, low-latency satellite internet, featuring a motorized antenna for self-orientation. Below are its key specifications:
- Type: Electronic Phased Array with motorized self-orientation
- Dimensions: 303 mm (L) x 513 mm (D)
- Weight: 2.9 kg (6.4 lbs) without cable; 3.6 kg (7.9 lbs) with 15.2 m (50 ft) cable
- Weather Resistance: IP54-rated for dust and water resistance
- Operating Temperature: -30ºC to 55ºC (-22°F to 131°F)
- Connect up to 185 devices
- WiFi 5
- Dual Band – 3 x 3 MIMO
-
Starlink Enterprise Kit
The Starlink Enterprise Kit is tailored for business applications, offering enhanced performance and reliability. Below are its key specifications:
- Type: Electronic Phased Array
- Field of View: 110°
- Orientation: Software-assisted manual positioning
- Dimensions: 594 mm x 383 mm x 39.7 mm (23.4 in x 15.07 in x 1.5 in)
- Weight: 2.9 kg (6.4 lbs); 3.2 kg (7 lbs) with kickstand
- Environmental Rating: IP67 (dust and water-resistant)
- Wind Resistance: Operational up to 96 kph (60 mph)
- Power Consumption: Average 75–100 W
-
UniFi U6 Mesh Pro (U6-Mesh-Pro)
- Wi-Fi 6 (802.11ax) support
- Dual-band: 2.4 GHz: up to 573.5 Mbps (2×2 MIMO), 5 GHz: up to 4800 Mbps (4×4 MIMO, 160 MHz)
- Max throughput: ~5.3 Gbps
- Gigabit Ethernet port (802.3af PoE input)
- Weather-resistant (IPX5) – indoor/outdoor use
- PoE powered (802.3af PoE)
- Managed via UniFi Network Controller
- Compact design – suitable for ceiling, wall, or pole mounting
-
UniFi Dream Machine Pro (UDM-Pro)
- All-in-one 1U rackmount gateway with firewall, router, switch, NVR, and UniFi OS support
- Dual WAN (1x 1G RJ45, 1x 10G SFP+) with failover and load balancing
- 8x 1G LAN + 1x 10G SFP+ LAN ports
- Quad-core 1.7 GHz CPU, 4 GB RAM, 16 GB storage
- IDS/IPS throughput up to 3.5 Gbps, Deep Packet Inspection, and advanced firewall
- Supports UniFi SD-WAN, VPN (IPsec, WireGuard, OpenVPN, Teleport), and policy-based routing
- Built-in 3.5″ HDD bay for UniFi Protect (NVR)
- Runs UniFi Network, Protect, Access, Talk, and Connect apps
- Redundant power ready via UniFi SmartPower (USP-RPS)















Reviews
There are no reviews yet.